| Author | Message | ||
     Nitrokeeb |
500 plus shipping, OR BEST OFFER. Fresh paint on the muffler. No road rash, but does have a small mark where rear cylinder tube rubbed on frame (see picture). I've got them boxed up. The box is 18x19x19 and weighs 21 pounds. Box will be shipped from area code 77536. Last time I shipped something like this it was around 50 bucks. I took these off of my M2 because I was tired of the attention (and the ringing ears). No other system I tried sounded half as good. I kept them in case I wanted to go back, but I've since sold my M2. These will need the O2 ports plugged if used on a M2. Also requires the use of the updated "Y" front mount, and the factory z-bracket rear mount. Feel free to reply with any questions.    | ||
| Dgruber58 |
Any chance this is still available? | ||
| Nitrokeeb |
Pending sale. I’ll let you know if it doesn’t sell. | ||
| Nitrokeeb |
Buyer flaked out. I've been busy with other projects and never got around to updating this ad. I've moved, and this will now be shipped from the Memphis area. | ||
| Hawgford |
im interested and shipping will next door to ga 30655 i have a vance and hines set up and a stock muffler that is no doubt a new take off theres no soot in the pipe hawgford@windstream.net.... i have the z bracket and the stock muffler clamp, the front motor mount is fugly welded on the merge or elbow and the SSR can is held on with springs and some kind of t- slot bracket on top of can in rear,cant see well.This is my first buell so i am not up on whats needed..i know i like the D&d sound and performance,Any help chimin in to my direct email would be appreciated. | ||
| Hawgford |
my sled is a 2000 m2 the stock muffler and the hines system for sale/trade.the pipes are surface rusted and has a weld repair where the pipes are close to each other under the carb.. wish i knew more... all the pictures i've seen of hines on google do not have a dual spring can mount set up SS2R | ||
| Hawgford |
pm sent my pipe has tig welds you can see but its no where near this clean not doe it have the'shoulders" where the sections were welded together as on this pipe | ||
| Hawgford |
its a 2-1 set up not 2 into 2 like this pipe so for ease of install best to use whole set up... What port gaskets are best to use on these? i have the woven steel type for evos... | ||
| Nitrokeeb |
Hawgford you have me a little confused. I'm selling this set, I don't need yours. I was holding on to this, but have sold my bike. This muffler only works with the D&D pipes, which I'm including. You'll also need the stock rear muffler bracket. You also need to use the updated "y" front hanger. For a M2 you'll need to plug the 02 port. Thats the way I ran it on my 02 M2. | ||
| Hawgford |
10-4 bein new to buells i didn;t know the head pipes match to the muffler. thought you wanted quieter per past discussions and I was offering options. .i;m sure with some parts from coneeng.com that muff can fit any pipe set but no matter, good luck, can;t see that price. If we all bugged coneeng.com enough they would make pipes for buells , have had personal contact on this and they say theres no money in it ,but yet D&D force and ? seem to .cone already make cans and merges that would work on a buell | ||
| Nitrokeeb |
D&D did make a slip on muffler that will work with a stock headpipe. The full system used longer pipes to increase midrange torque I believe. |
