| Author | Message | ||
     H0gwash |
I have for sale a set of S3 locking saddlebags with unreinforced Inners, and scuffed silvery lids and 3 sets of keys. I also have collapsible liners, the subframe and the rear bracket. $500 + shipping or best offer. I don't want to split up the set unless I can get rid of it all quickly. My Paypal address is GerardWing at Comcast dot Net. The paint finish feels rougher than the sparkly paint in the photographs would suggest. I would scuff it up more and repaint them, but a owner of a silvery Buell may want to try and restore them. There are some thin cracks in the usual place on both Inner Saddlebags which don't photograph well, I will email you the complete set of pictures to the email you request. I have fiberglassed my own Inners as mentioned in the BadWeb archives. It has been effective if kinda gnarly looking. My understanding is the Inner Brackets are ABS plastic. http://www.badweatherbikers.com/buell/messages/3842/34032.html The latches are known to fail, one of mine has. I have used this solution also from the BadWeb archives: http://www.badweatherbikers.com/buell/messages/47623/671637.html I am working on another solution which will essentially be a blank plate with the cylinder mounted in it with an enlarged arm on the cylinder which corresponds to a hole in the blank plate above the unlocking mechanism directly below. The drawlatches are also known to fail. 2 of mine have. I have replaced those two with U bolts and large fender washers as recommended in the Badweb archives. I have fitted a set similar to this to my 2000 M2 Cyclone. I had to fabricate a bracket for the subframe from a 6" wide x 1/4" thick luminum C channel and judicious use of jigsaw, if I recall correctly. I used a threaded steel rod coupler, some washers and a longer bolt at the footpegs, and I used a pair of carpenter wood brackets about 8 or 10 inches long, I'll take that picture at the next opportunity. Puppy not included.       | ||
| Scott_in_nh |
email sent | ||
| Scott_in_nh |
PM response sent | ||
| H0gwash |
Hello Scott, pics sent. | ||
| Scott_in_nh |
What's the story with the black ones? Do you need a seat? | ||
| H0gwash |
I already have a stock seat. I cut down a rotten one for the crazy 1 seater and rack shown above. | ||
| H0gwash |
Set of Bags, subframe and rear bracket and liners are sold. |
