| Author | Message | ||
     Williamscottrobertson |
As the title says. I’d like to have one for my S2. It’s bone stock except for a Vance and Hines, I’d prefer a stock original to finish it off. I can do some reconditioning if need be. I know these are hard items to find for a bike that there’s probably less than 1,000 worldwide remaining. Thanks! | ||
| 97bueller |
I have a stock muffler off my 97 s3 if it works for you. In awesome condition 2 inch inlet. Took off with 15 thousand easy miles on it. | ||
| Williamscottrobertson |
I think they may be different. I’ll have to research a little bit. Does it have an elbow on the inlet? If so, it won’t work with the stock S2 header. (Message edited by Williamscottrobertson on December 03, 2017) | ||
| 97bueller |
The head pipe is different | ||
| Ratbuell |
S2 mufflers do not cross over to any other model. | ||
| Williamscottrobertson |
That’s what I thought. Makes it tough to find one reasonable. | ||
| Williamscottrobertson |
K12pilot, I responded to your yahoo email address and it was returned as non deliverable. I also sent you a reply pm thru bwb. Hopefully you see this and we can get together on your s2 muffler. Thanks - william | ||
| 96s2t |
I have a S2 muffler if you still need it. |
