| Author | Message | ||
     Argulace |
I have a few parts left over from my overbuying while building a custom M2. I had bought a couple of extra tail sections to do a trim the fat project on my M2, I found the look I wanted now selling off the extra parts. I will happily give a discount to anyone buying more than one part. Everything is negotiable but bare in mind shipping on these body parts is not cheap. I do not ship outside the ConUS sorry. ALL PRICES INCLUDE SHIPPING IN THE CON USA. 99 up wide M2 Tail Section stock black paint. Has the standard stress cracks in it at the mounting surface, small chunk missing at mounting area probably from someone shaving a seat down. Other than that pretty nice. Few small nicks here and there. $125 97-98 Cyclone Tail Sections (2). One with the rear box, the other without. Both are in good shape with standard wear and tear. $125 for the one with the rear box (tail light mount), $100 for the one without. S1/M2 (not the wide one) Fuel Tank OEM Paint Red. One scratch and a few small nicks. Really good shape! $150 Pre 2000 (narrow) Corbin Seat for Cyclone/M2. Really nice with one really small wear spot on the front left (wont show in picture) and some sun fade on the Corbin patch that covers the passenger backrest insertion channel. Passenger backrest function installed, backrest not included. You can get one from Corbin. This fits the narrow 97-98 tail. $200 Chromoly Krator Café Bars (M2/X1/Lightning Fits dual gage cluster models as well as single gage cluster models) Some marks from previous installation. $40 Alloy M2 bars (single gage cluster only). Some install marks. $40 Pics of actual parts for sale:             X1 Tail and Corbin Seat installed on M2 (actual parts - The bike is not for sale)   (Message edited by argulace on May 17, 2017) | ||
| Tmbabb |
So the Corbin M2 seat is or isn't for sale? | ||
| Argulace |
Tmbabb the Corbin seat IS for sale but it fits the early M2 tail not the wide 2000 and newer tail. In the example pics, my bike has a pre 99 tail on it. Sorry for the confusion. If you need the tail and the seat let me know I'll make you a good deal on both. (Message edited by argulace on May 17, 2017) | ||
| Tmbabb |
Well, there is definitely some confusion. I see two '97-'98 tails for an M2 and one 1999 and up M2 Cyclone tail. And one '97-'98 M2 Corbin seat. The bottom pic is with a '97-'98 M2 Cyclone tail and the Corbin seat that fits. I do not see anything that resembles an X1 tail or seat. I may be interested in the M2 Cyclone Corbin seat if its for sale. The seat actually says Cyclone on the bottom of it. I believe the red tank may be from an S1 or '97-'98 M2 as well. | ||
| Argulace |
Tmbabb, I have corrected all of the descriptions. The Corbin seat is for sale as shown for $200. It fits the narrow tail as shown on the bike. I had a friend help me ID the parts and he was wrong. I did the research and corrected the listing. Thanks! | ||
| Blks1l |
Out of the 2 M2 tail sections which is in nicer condition regarding paint flaws or any other damage. I am interested in one of them. I also need to verify after work today if I do have an extra one of the tail light mount brackets. | ||
| Argulace |
Blks1l, I think they are both really close. The one with the box seems just a tiny bit nicer but the other one is really good too. The one that was installed on my bike in the pictures is the one without the box. | ||
| Blks1l |
Thanks, so the one missing the box, was part of it cutout or is it a removable piece, I can't recall how it is setup. This is for a project that I have so I haven't looked at it that closely, but remember seeing some kind of license plate holder in my stash that I thought might be for this application. | ||
| Argulace |
Blks1l, yes it was cut out. Its a common thing to do when you put an integrated tail light in or flush mounts. The guy I bought it from was is a fabricator and he made a stainless steel light box with license plate mount (you can see it in the pics on my bike), that goes with the tail which is missing the box. If you want stock turn signals or side mount signals you will have to drill out the box. The tail light on my bike has integrated signals so it was never drilled. Otherwise the tail with the box is in stock configuration if you want that one. | ||
| Blks1l |
Thanks, I did take a look at what I have and it appears that even yours with the box has been modified. I currently have one of the M2 Peacekeepers that has a modified tail section, I am going to have to hold out for an unmodified tail, hopefully sometime I can find one. | ||
| Argulace |
If nobody wants any of this stuff I'm going to throw it on eBay. | ||
| Thunderlust |
I'm interested in the low bars in the picture. nelsonvenice@gmail.com | ||
| Zfinatic |
Are the low/cafe bars still available? | ||
| Argulace |
Café bars are sold pending payment. | ||
| Normthenomad |
Will the early tank and tail work on '99 M2 frame? | ||
| Argulace |
Normthenomad, Yes it will. | ||
| Normthenomad |
Pm sent | ||
| Argulace |
All pm's and questions have been answered. |
