G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   S1owner Posted on Friday, November 27, 2015 - 04:03 pm:        WesTek Billet Clip Ons, with billet 1" to 7/8" stepped handlebars (Note these are thinner then 7/8 and will need work or tape under towork properly) and 1" chrome handlebars S2T height. Both these bars were adapted from other bars, but much more adjustment available than factory S2T bars due to the dual pivot points. These will fit all tubers with factory USD forks if you push your tubes up ~2" in the trees, or better yet use the more adjustable WP ROMA forks from the S2s as they are 2" taller than S1/X1/S3 forks due to the clip ons. $130+shipping.   Johnod Posted on Saturday, November 28, 2015 - 09:55 pm:        I'll take them, PM following. PM sent. (Message edited by johnod on November 28, 2015)   S1owner Posted on Sunday, November 29, 2015 - 12:08 pm:        Sold

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: