| Author | Message | ||
     Jdugger |
I'm parting out my race bike after a crash this season that's in part made it impractical to rebuild. I'm working on pictures and pricing to follow up on this, but wanted to get the items posted for those build for next year. 1125r/1190cc Motor • This thing is a total monster. Absolutely ridiculous power. Pulls HARD about 6k all the way to 11,125. • 160HP (at the wheel), 106 ft lbs Torque, EBR Exhaust and VP T4 Gas, Jim Cambora's Dyno • Was an 1125r-DSB Motor originally, blueprinted by EBR • Rebuilt, Danny Bilansky to 1190cc using EBR 1190cc kit • Suter Slipper Clutch Installed, tons of spare parts included • Oberon Clutch Slave • Comes complete sans electrical harness - includes throttle bodies, injectors, etc. EBR Race Exhaust • Good condition – has had mount bracket that cracks typical of this exhaust. Welded and reinforced, no problems since. • 1125r DSB era exhaust system ECM & Dash • Fully programmable model including cable and software. • Programmed for 1190cc motor, VP T4 Fuel, EBR Exhaust, Above motor • Showing 50,000+ miles, but this is across quite a number of motors and history  Clean/Clear Chassis & Title • Good condition • Has some typical damage from just riding time, but no crash damage. • 2008 Model, Diamond Blue Untitled Chassis, $500 • Was a salvage title when I bought it, but I lost that • 2008, Diamond Blue • Great condition 1190RX Forks • Basically new 1125r Upper Fairing Brackets • I have these in "race style" that are milled down (lightened) and stock. 1125r Stock Exhausts • I think I have two of these Misc: • I've got all the parts you would expect from a total part out, so ask if you are looking for something. I think my chain drive kit is spoken for already. Half of the bodywork (Flexi-glass Generation 2 ram air kit) came out of this pretty OK, so if you are looking for that... If you want to build the most killer 1125r ever, get the motor, exhaust, and ECM and hang on for dear life. I promise it pulls harder and sooner than an 1190RX. Digs out of a corner like the thumb of God is shoving you down the track. Get all three and I'll throw in 20 gallons of VP T4 race fuel. | ||
| Sgtbuell |
Very interested in the 1125r/1190cc Motor, ECM and body work. How much for each so I can see what my budget is. Engine first please. Sean | ||
| Sgtbuell |
pm sent as well | ||
| Jdugger |
responded PM. | ||
| Pedalpimp |
I would be interested in the ZTL2 caliper, hose and master if you have it. | ||
| Jdugger |
You want a milled out race caliper or a stock (RX) style caliper? I have an RX stock MC and RX stock caliper I can sell. I want to hold on to my milled race calipers and Brembo RCS19 pieces as I can use them on the endurance bike. | ||
| Sgtbuell |
Jdugger, My deepest apologies. Just bit off more than I could chew and thought I would have the funds. Sean | ||
| Jdugger |
No sweat at all. Thanks for your service, btw. | ||
| Jrobey7 |
What are you asking? I think it would benefit to throw prices, save everyone time. Let the buyers PM you to keep sales private. Definitely won't have many Buells or EBR's in front of you at the track with that setup. *i know what that work & exhaust are worth* it ain't cheap or common | ||
| Shawns |
pm sent | ||
| Nightfire |
How is the front brake rotor And is it the race rotor from ebr? | ||
| Nobuell |
Jdugger, Please send me a PM regarding the motor. I was considering upgrading my motor this winter. | ||
| Jdugger |
I honestly haven't worked through the pricing yet. I'll base it on what like kind and quality are going for once I look around. On the big stuff, I'm thinking around $5k for the whole Motor, ECM, Exhaust and Cluster set up. I'm flexible about this stuff if you are a racer and enthusiast. Others have helped me. | ||
| Dannybuell |
Brembo controls? | ||
| Jdugger |
I'm hanging on to the wheels, Brembo bits and other stuff that directly translates (and upgrades) the RX. No one wants a rotor I've decided I don't want anymore unless it's on a wheel I'm selling I might have a stock RX wheel for sale as well. | ||
| Bullettooth023 |
Pm sent | ||
| Jdugger |
Pictures here: https://www.facebook.com/media/set/?set=a.10156269 506315121.1073741831.652810120&type=1&l=52ad9ab3bb | ||
| 2stang |
RX wheel front or back? | ||
| Jdugger |
Front. | ||
| 2stang |
Ok, I'm looking for RX/Sx rear. Do you know where I could get one or have the part number for one? | ||
| Skntpig |
Interested in RX forks, front wheel and milled fairing stay. Can you PM me prices for each? | ||
| Jdugger |
Responded | ||
| Jdugger |
Pricing... if you don't like my numbers, make an offer. Motor: $3k Exhaust: $1.2k Chain Kit: $1.2k Titled Chassis w/ Fuel Pump: $1k Full Program ECM + Dash: $500 Race Fairing Brackets $150 RX Forks $500 RX Front wheel, complete $700 | ||
| Dannybuell |
accossato RX controls? | ||
| Jdugger |
Forks have sold. | ||
| Jdugger |
> accossato RX controls? I use Brembo, and I'm keeping them. | ||
| Skntpig |
PM offer sent | ||
| Pedalpimp |
PM Sent | ||
| Jdugger |
responded to both | ||
| Jdugger |
brake kit gone. Forks gone. |
