G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Fresnobuell Posted on Wednesday, September 10, 2014 - 07:41 pm:        I am having clearance issue on my 1125R with these M/C so I figured maybe someone on a CR wants to upgrade. They are both NEW IN THE BOX radial units, so you will see improvements in performance (esp. on the brake side.) Comes with integrate brake light switch and a the bracket/mount for the resevoir. Plug and play--you will not need any additional parts. Even your stock banjo bolt will work with this unit. $350 shipped for both.   Dannybuell Posted on Wednesday, September 10, 2014 - 07:59 pm:        Yes Please   Skntpig Posted on Thursday, September 11, 2014 - 12:09 am:        2nd   Fresnobuell Posted on Friday, September 12, 2014 - 08:29 am:        PM'ed Dannybuell. Skntpig, if I don't hear back from him by the end of the weekend, I will contact you. Just cause they so purty:   Fresnobuell Posted on Friday, September 12, 2014 - 09:56 pm:        PMed both Danny and Skntpig.   Skntpig Posted on Sunday, September 14, 2014 - 07:31 am:        Where are you having clearance issues? I am interested but I am also planning on putting a stock R fairing mount and fiberglass upper fairing on the cr for track days.   Fresnobuell Posted on Monday, September 15, 2014 - 03:03 pm:        Clearance issue with the fairing mount, so if you plan to use the levers with the R mount, and everything else is stock (triple tree, clip ons, etc) you will most likely run into the same issue it did.   Omiotek Posted on Tuesday, September 16, 2014 - 02:26 pm:        Will these works on an xb9r with a ztl2 caliper?   Fresnobuell Posted on Tuesday, September 16, 2014 - 04:13 pm:        The only thing you would have to be sure of is clearance with the front fairing mount and/or front fairing..probably the fairing mount (although I have never owned a XB9R so I have no idea of the room for a longer MC.) The handlebar is 7/8" I am sure and the banjo should be 1.25 pitch, so everything else SHOULD be fine....   Omiotek Posted on Tuesday, September 23, 2014 - 06:33 pm:        As much as I want to buy I just would hate to buy and have them hit.... Sucks... Maybe if the bars are the same we can do some measurements back and forth from the bar to the fairing   Sticks Posted on Friday, September 26, 2014 - 07:29 pm:        Regarding the XB9 application, the clutch side wouldn't work due to the fact that the XB clutch is cable actuated and not hydraulic. I had a 19mm Nissin radial master cylinder on my XB9SX and it was great with the 8 piston Nissin gorilla's fist caliper. No idea about an R, the clutch thing though

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: