| Author | Message | ||
     2stang |
-Forks: Came off 1125R race bike. They are stock silver 47mm showa’s with Racetech valves and 1.1kg/mm springs. I disassembled to verify internals, at that time I put in fresh 5wt oil and OEM dust seals, all bushings and oil seals looked good. Axle pinch bolts drilled for safety wire. - $400 -Forks: Excellent condition, like new. Only 2400 miles, never even been adjusted. Preload nuts, compression and rebound screws never been turned. Silver in color. - $400 -Front and rear wheels: Flat black with red pinstripe. Both rims got bent from giant pothole, have been straitened, but powder coat got messed up during repair. I have touched paint up and they look decent now. Wheels have low miles, less than 5000; they are off a 2009 CR so the rear bearings are the better ones. $300 for both, if you ever priced out new wheels you’ll know you can’t even get one for this. -Front and rear wheels: Flat black. Both in great shape. Rear has fresh bearings, O miles. Rear will come with stock brake rotor, but no sprocket. - $450 -Stock 1125 shocks, both have less than 4k miles. - $100 each -Red fiberglass front fender, made by flexi glass. Has brake cooling duct and air deflector(routes air to airbox inlet) Paint is nice, some cracks and chips. - $100 -GPR steering stabilizer, black on black. Comes with gold hardware. - $300 -GPR steering stabilizer, red with black dial. - $300 -Attack Performance upper and lower triple clamps: clamps only, no offset bushings or stem. These are hard to find, good shape. - $400 -EBR billet top triple clamp. Brand new - $140 -Upper and lower stock triple. Top is modified for use with clip-ons. -Vortech clip-ons 54mm, fits all buells - $100 -Upper and Lower belt guards: I have 3 uppers and 2 lowers. - $10 each -Subframe - $100 - idler pulley, and idler bracket for 1125R: $60 -Air box with base plate, also with ram air scoop: Excellent shape - $40 -Rear brake caliper with line,master cylinder, reservoir, and pedal. Excellent - $150 -Upper and lower fork clamps(triple trees) with handle bar clamp off CR: Excellent shape - $200 -Bodywork Red. Front fender, excellent -$50. Tail section, no seat cowl, excellent shape. Both fender and tail section will fit 1125’s and XB’s - $100 -Lower tail section with brake light: I have 2, excellent - $100 each -Axles: I have 3 rear and 2 front. Fit 1125’s and XB’s- $20 each -Radiators: Left and right, good shape no leaks of bent fins. $75 each -Radiator fans: I have 2 lefts and 2 rights. All come with shroud. - $60 each -Radiator cowling: I have 2 lefts and 2 rights. $20 each -Radiator overflow bottle: I have 3. $20 each -High handle bars with heated grips. This is a complete kit from Buell, comes with longer throttle cables, extended brake lines, and factory wiring harness. Excellent shape, low miles, like new - $200 -Rider seat: good shape - $50 -Rear seat, excellent shape - $25 -Front sprocket cover - $10 -Rear fender(hugger) - $15 -Plastic heat shield/ frame cover - $20 -Under tail/ fender: blank - $10 -Under tail/ fender: comes with blinkers and license plate light - $25 -Tool kit - $10 -XB12R windscreen: Orange, good shape - $20 I have other little odds and ends. If you're looking for a specific part, just ask. All parts in good shape or better, I do not sell junk. Will take detailed pictures at buyers request. | ||
| Northernyankee |
Radiator cowling: I have 2 lefts and 2 rights. $20 each Are these the outer Pod? If so and you have a left in good shape I will take one. (Message edited by Northernyankee on June 26, 2014) | ||
| 2stang |
No, it's the pieces just inside the outer pod. | ||
| Stockkarr |
I'm interested in the following. Any chance i can get a photo of each? Thanks! -Red fiberglass front fender, made by flexi glass. Has brake cooling duct and air deflector(routes air to airbox inlet) Paint is nice, some cracks and chips. - $100 -Air box with base plate, also with ram air scoop: Excellent shape - $40 -Under tail/ fender: comes with blinkers and license plate light - $25 | ||
| Crazed_mouse |
Interested in: -Rear seat, excellent shape - $25 PM sent | ||
| Skntpig |
Do you have a right side (brake side) cast k bracket that holds radiator to frame? | ||
| Skntpig |
Do you have any vent overflow bottles you have already fabbed? | ||
| 2stang |
Sorry for the delay guys. -PM returned on seat -no k-bracket or vent overflow -on pictures of parts, its easier for me to email directly, so PM me your email and I'll get them sent out. Thanks | ||
| Shawns |
pm'd on tool kit | ||
| 2stang |
EBR top triple, clip ons, and rear seat sold | ||
| Stockkarr |
I PM'd you my email address for the photos. Thanks | ||
| Crazed_mouse |
Rear seat arrived in excellent condition. Thanks 2stang! | ||
| 2stang |
Still lots of parts available! | ||
| Shawns |
pm'd ya about the tool kit a couple of weeks ago. | ||
| 2stang |
I forgot I have been using the spanner wrenches out of both tool kits, so neither are for sale, sorry. High bar kit and license plate fender - sale pending. | ||
| 2stang |
high bars and license plate fender sold! | ||
| Zew2888 |
PM'd about GPR damper | ||
| 2stang |
Zew2888 - PM returned | ||
| Workman482 |
Do you have a left mirror and a clutch lever lying around? | ||
| 2stang |
Sorry workman, no mirror or clutch lever. | ||
| Sl33py |
PM'd you for pics of forks and rims. Thanks Joe! Rob | ||
| 2stang |
Rob - Just sent you an email with pics | ||
| Aj2010 |
I would be interested in the cr upper triple with bar clamp, if you decide to sell it separately? If so just pm me with a price thanks. | ||
| Aj2010 |
OK Joe, money sent for upper CR triple clamp and handle bar bracket. Thanks. | ||
| 2stang |
CR upper triple sold to - Aj2010 CR wheels, black with red pinstripe sold to Rob(Sl33py) Thanks guys, packages will ship today. | ||
| Parrick |
PM'd about -Bodywork Red. Tail section, no seat cowl, excellent shape. - $100 | ||
| 2stang |
Red tail section sold to Parrick | ||
| Bern |
PM'd about -Front and rear wheels: Flat black. Both in great shape. Rear has fresh bearings, O miles. Rear will come with stock brake rotor, but no sprocket. - $450 | ||
| 2stang |
Bern - I didn't get a PM from you, email directly at 234viper@live.com. | ||
| 04colly |
Any pics of the high rise bars? 1125cr upper triple? |
