| Author | Message | ||
     Buellcruiser20 |
does anyone have a whole wiring harness for a buell m2 cyclone its a 01. i need it amidiatly. if anyone knows were i can get one please post up cuz harley wants to much | ||
| Captainplanet |
Anyone have an amber windscreen off a stock 12R they would like to part with. If so, email me at crumpley@ccsse.org | ||
| Santosbj |
Wanted - Black S1 Flyscreen and front Fender in perfect condition}} | ||
| Vr1203 |
Wanted Aerocharger turbocharger.Sized, 114 or 128,53000 series. e-mail me ,jbmurray at cis.net, (change the "at" to "@" ) | ||
| Rek |
WANTED: Used 2000 S3T headers (or comparable fit) w/out cracks. | ||
| Wrong36 |
race-ECM for an 01-x1 ? high-perf O2 sensor ? thanks | ||
| Joesbuell |
wanted S1 twin tail,seat,bracket under seat and tail light or solo seat,tail section and tail light. | ||
| Vindigni714 |
Joe, Ebay has what you want,both sets! Johnny V Vindigni714 | ||
| Vindigni714 |
Hay Bueller's I'm lookin'for a rear light (metal) bracket for my 96' S1. Mine cracked at the bolt hole! I just missed a chromed one on e-Be-quick-Bay. And, I know there's one "complete" set with light and plate holder on ebay but, I don't need all that, just the metal bracket! If anybody has one or can turn me on to someone who might, I'd be grateful! Johnny Vindigni vindigni714 | ||
| Vindigni714 |
Loki, I'm hopin'to get back to you'bout the pipes. Tough times in the music business,in "The Big Easy" Hope you can hold 'em for me, but I understand. Money moves parts. I'll keep in touch, Johnny V | ||
| Jsunstar |
anyone else have problems with their fiberglass bodywork falling apart??? (chipping cracking shaking to death!!!) well its happening to me. so, anyone have a front fender and fairing for a 95 s2 laying around? i need them to make a complete set of extra bodywork while i do the bodywork i need to do and repair and paint all of mine thats cracking and falling apart!!! any help is appreciated! | ||
| Schu |
WANTED-EXHAUST HEADER TO FIT 1998 S. ALSO NEED COMPLETE UPDATED FRONT BRAKE ROTOR AND HARDWARE, THIS ONE IS RATTLING !! THANKS, CHARLIE | ||
| Josh_ |
Charlie - buy the rotor new - you're sure it won't be warped and it's only ~$110. Make sure you get new matching pads to go with it since the rotor material changed in 99. | ||
| Oddbawl |
Hey there, Proud new father of a '96 S1  lookin fer a twin tail seat set up to keep the wife happy. The bike's Reactor Yellow, but colour doesn't matter. | ||
| Lake_bueller |
Oddbawl....there's a twin tail on ebay right now. There's also someone here with a Corbin seat for the twin tail. Good luck. These things are hard to come by. | ||
| Huntzh |
I am looking for a used Corbin seat for a 99 up S3...Can anyone help? | ||
| The_x_man |
Wanted: Mikuni HSR 42 Has to be in good condition !!! mail: thexman2005@yahoo.com | ||
| Mikej |
Jsunstar/Jason, Can you document what is happening to your bodywork and put it in the KV body section or in the older Buell section here? Just curious if the laminate is delaminating, or what is actually happening. Thanks. Mike. | ||
| Blackjoe |
Hey guys, looking for a fuel pump for a 99x1. Bought this, my first buell, a couple of months ago and even though it's had one mechanical issue after another, it is still hands down the funnest bike I've ever ridden... now if I can just keep it running for more than a week at at time life will be grand. | ||
| Bottom_feeder |
Wanted: Hard bags for 1999 S3, Deep or Shallow, with or without liners, I am not picky, but black would be preferred. I am currently using bags that I think are for a M1, they fit but are just too small. I would also be interested in a tank bag and a rear seat bag. |
