| Author | Message | ||
     Forerunner |
A few parts that gotta go. More to come when I get time to take more pictures of the other parts. All prices include shipping to the lower 48. Blast parts removed at 650 miles. 1125 tail complete with side & rear reflectors and license plate light $25   Blast footpeg brackets with 1125Cr footpegs modified and installed and original rider/passenger footpegs included. Also includes inner frame mounting plates, lock nuts, and master cylinder and reservoir bolts, usual paint scuffs but overall good shape. Pricier since they’re heavy to ship and the dang Cr footpegs cost me $30 lol. $75     Complete set of Blast turn signals, includes front spacers, lock washers, and nuts. Some scratches and rust on the screws $25   Brand new Driven and ProGrips, $16ea  Stock black X1 levers, removed at 5k miles, slight scuff on bottom of clutch lever that’s been touched up. I tried to capture it in the picture, $25    X1 rear brakeline, includes brakelight pressure switch. Why in god’s name anyone would need one of these I don’t know, but here it is, $15  | ||
| Kilroy |
PM sent | ||
| Kilroy |
paypal sent | ||
| Jsunstar |
ill take the turn signals pm me please | ||
| Forerunner |
Blast turn signals SOLD! PMs replied. | ||
| Forerunner |
More parts, shipping to lower 48 included: Cheap eBay made in China LED tail light with integrated signals and clear lens. Installed for a couple of hundred miles. Works and looks great but the LED density is sparse. Also has down firing white LEDs to illuminate the license plate(which the Clear Alternatives brand don’t, go figure). Like new condition $20   Cheap lane splitter mirrors that came on my X1, $10   Clear Alternatives brand ceramic load resistors used for slowing down the fast flashing when LED turn signals are installed, includes grommets and wiring taps. Brand new $8/pair Also have 1 pair of ceramic load resistors where a lead wire broke off(right most pair in pic below), can be easily soldered/repaired $5  3 Clear Alternatives brand smoked tail light lenses for X1, S1, M2, Blast, and some older Ducati Monsters. Includes red bulb and STICKERS! Yes STICKERS! Brand new $25ea  Blast OEM flasher relay removed at 650 miles. $8  Blast stock silver lever set, slight scuff on end of one lever. $25   Brand new never installed Buell tachometer. $50   S2 dash removed at just over 13k in good shape with speedometer, tachometer cup(no tach) and idiot lights. $75   More items to come… Thanks, Nels | ||
| Kilroy |
another PM sent | ||
| Forerunner |
All PMs replied to. 1 smoked Clear Alternatives tail light cover pending, 2 left Bar end mirrors pending Crappy pic of the bar end mirrors on my X1 when I first got her:  Thanks, Nels | ||
| Kilroy |
another paypal sent Kilroy | ||
| Dutch_x1 |
Pm on 2 smoked taillight lenses | ||
| Forerunner |
All PMs replied to. 1 Smoked Clear Alternatives tail light cover - SOLD Bar end mirrors - SOLD 2 Smoked Clear Alternatives tail light covers - PENDING Thanks, Nels | ||
| Forerunner |
All Smoked Clear Alternatives tail light covers - SOLD Thank you BadWeb! Nels | ||
| Kilroy |
got the goods- thanks! | ||
| Forerunner |
Thanks Kilroy! S2 dash - PENDING Cheap ass Chinese LED tail lights - PENDING Nels | ||
| Forerunner |
More parts, shipping to lower 48 included: Dan’s(Thumpe) awesomely over engineered breather catchcan for the Blast. Had this installed for less than a 100 miles, looks and works great but decided to go a different direction. Run your breather hose to this and stick a K&N breather filter(not included) on top and you’re set. $40   Blast stock front and rear brakelines including rear pressure switch. Installed stainless lines and find the brake feel just too darn firm? Prefer the squishy feel and classic thick black looks of the stock lines? You’re in luck! $20 for both.   Stock blast mirrors in excellent shape. $25   Complete set of XB12Ss stock stainless oil lines in great shape. $45  Still have your kickstand safety switch? Don’t feel comfortable disabling this ‘safety’ feature?  Here are some spares: X1 kickstand safety switch, includes wiring harness plug and mounting lock nuts, excellent shape. $20  Blast kickstand safety switch with mounting lock nuts, like new. $20  Thanks for looking, Nels | ||
| K12pilot |
Are gel grips still available ... Size?? Thanks (Message edited by K12pilot on May 17, 2013) | ||
| Forerunner |
S2 dash - SOLD Cheap ass Chinese LED tail lights - SOLD Both grips are still available and fit 7/8" bars. Asking $16ea but first $26 takes both. Thanks, Nels | ||
| K12pilot |
I'll take the grips Pls send info | ||
| Forerunner |
PM sent. Thanks, Nels | ||
| Forerunner |
Driven grips - SOLD ProGrip Superbike grips still available - $16 Thanks! Nels | ||
| Forerunner |
Blast footpeg brackets w/Cr pegs - PENDING Stock Blast mirrors - PENDING Nels | ||
| Reducati |
forerunner, ill take the tach can you send a pay pal invoice to d(dot)doody 1 at hot mail dot com thanks | ||
| Forerunner |
All PMs and requests replied to. Buell Tachometer - PENDING Thanks! Nels | ||
| Reducati |
payment sent, ( i assume it will fit a s2?)thanks, dan | ||
| Forerunner |
Dan, PM'ed ya. Let me know what works. Thanks! Nels | ||
| Reducati |
Nels, hold off on sending it, ill put a thread up in the old school/ s2 section, and see if anyone knows if it ill fit. thanks, dan | ||
| Forerunner |
Dan, Will do! Let me know. Nels | ||
| Reducati |
Nels, i think i figured out what was wrong with the old tach, (wiring). so i wont need your tach ( i hope)! thanks for your patients. dan | ||
| Forerunner |
New Buell tachometer available again. More Blast and X1 parts, shipping to lower 48 included. Larger items will take me a little longer to pack/ship. Stock Blast airbox like new(650 miles) complete with filter, paper gasket(I would probably replace), mounting bracket, and some bolts. . $40     Stock Blast rear hugger/upper belt guard also like new with 3 stock bolts and well nuts. $40    Blast lower belt guard in cherry condition, includes both stock bolts and well nuts. $15   Blast side panel also cherry. $25   Blast tail/rear fender/license plate holder with reflectors, cherry. $40     X1 hugger, includes stock bolts and well nuts. $50    X1 lower belt guard, includes both stock bolts and well nuts, and stone guard(not pictured). $30   X1 tail/rear fender/license plate holder, includes license plate light and reflectors. $50     Still a few more items to come. Thanks for looking! Nels | ||
| Forerunner |
Blast footpeg brackets w/Cr pegs - AVAILABLE Stock Blast mirrors - AVAILABLE Stock Blast airbox - PENDING Blast tail/rear fender/license plate holder with reflectors - PENDING Thanks, Nels |
