G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Harley_jethro Posted on Monday, May 20, 2013 - 12:39 pm:        Here is the quick shift i purchased from a fellow inmate here on Badweb and never got around to using. Sell for $100 o.b.o. shipped CON US   General_tso Posted on Monday, May 20, 2013 - 12:54 pm:        HJ, I'll take it. Do you accept Paypal? (Message edited by General Tso on May 20, 2013)   Harley_jethro Posted on Monday, May 20, 2013 - 05:13 pm:        Replied to pm. Item sold.   General_tso Posted on Monday, May 20, 2013 - 08:20 pm:        Payment sent   Smoke Posted on Monday, May 20, 2013 - 09:30 pm:        is it a 4-101? (i know it is sold) tim   Harley_jethro Posted on Tuesday, May 21, 2013 - 05:22 am:        Tim, it is a 4-113. Jeff   Smoke Posted on Tuesday, May 21, 2013 - 06:14 am:        i have one of those and could not make it work with the race ecu. it is made for the power commander 5. i did not do any additional troubleshooting and went back to the -101. if you get it working let me know how. thx tim   General_tso Posted on Tuesday, May 21, 2013 - 01:29 pm:        Smoke, Response from an inquiry to Dynojet 4-101 is designed for PC3usb and has a connector to go to PC3usb. 4-113 has no connector and has bare wire ends designed to go to a PC5. I would recommend buying a 4-101 PC3usb sensor and cutting the PC3usb connector off. This will ensure that you are getting a normally open circuit switch, which is what your race ECU needs. Some of the older PC5 shift sensors might come with a normally closed circuit switch. If so, it would not work with your kit ECU. So get the 4-101 to be safe. Let me know if you have any further questions. Regards, Chris Kelly Dynojet Research Inc. 2191 Mendenhall Dr. Suite 105 North Las Vegas, NV 89081 1-800-992-4993   Smoke Posted on Tuesday, May 21, 2013 - 06:15 pm:        what i remember is that the engine would cut out after you released from the upshift when plugged into the Buell race ECU instead of when you pushed down on your gp shift. ran that weekend unplugged! tim   Harley_jethro Posted on Tuesday, May 21, 2013 - 10:26 pm:        Thanks to everyone involved for the time to gather information. Put a meter on the wires tonight and found it is normally closed. Activating the solenoid broke contact meaning it will not work with our ECM's Hopefully someone with the proper electronics and or appropriate bike can make use of it otherwise I have a very expensive set of Dynojet decals...lol   Smoke Posted on Wednesday, May 22, 2013 - 06:34 am:        sorry to queer the deal. i bought my -113 from a yamaha r6 guy that was getting out of racing so that may be a better place to try and sell. your price is dirt cheap. try listing it here. http://weraclassifieds.com/#axzz2U14g0vcQ tim   General_tso Posted on Wednesday, May 22, 2013 - 10:50 am:        Smoke, appreciate the input as it prevented a lot of frustration. After learning this quickshifter won't work with our bike HJ refunded the payment. HJ is a class act! (Message edited by general tso on May 22, 2013)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: