| Author | Message | ||
     Foximus |
So from the wanted thread there were a few people who urged me to make some stenzel bars. As of right now I made a batch of 12. (I think. I lost count, but I ran out of metal) In my opinion this is a superior design, as it is more rigid, and weighs less, also, no need to replace the front ISO bolt. Price is $55, OR $50, if you choose to leave the rear blank to punch and drill your own hole. I have 6 spoken for already.    | ||
| Foximus |
Edit... this is just the picture of the first one I made... so its a bit rougher looking than the rest. I will MORE than gladly work a trade for a belt as well... as I have not had a belt on my buell for over 2 months now... lol (Message edited by foximus on January 14, 2013) | ||
| 1eyert |
Foximus, no rear hole for mine also, thanks again. Art..... | ||
| Foximus |
Yessir. Ready when you are. | ||
| Serialk |
Got a spare belt from my X1. I ship you belt you ship bar??? Outta town till Friday. Can send you Picts of the belt when I get back if your interested. It's not a new belt it's my emergency get me home used sportster belt. No cracks or damage. | ||
| Foximus |
Sounds good to me. Any idea how old it is? Shoot some pictures | ||
| Serialk |
I bought it off eBay from pinwall cycles 3 years ago off a sportster with 8,000 miles. It has the orange sportster writing on it. It's a decent used belt. Will send pictures when I get back home. As far as I can remember no fraying or cracks | ||
| Bikerrides |
Fox, I was going to offer a set of NOS chrome instrument bezels as a trade, but I'm not sure you could use them after looking at the bike on your profile. If you are interested, just let me know. Was thinking of making one for myself, but it would be easier to get one already made.  | ||
| Foximus |
LoL Yea, dont think I can use them. But thanks for the offer. Ready to ship out whenever you guys want. One went out to Australia today. | ||
| Cyclonecharlie |
Fox, Give me some payment info in an email..thanks | ||
| Foximus |
Sent. | ||
| Cyclonecharlie |
PayPal sent, Thanks | ||
| Bikerrides |
Fox, Is the part made to work with the front iso from American Sport Bike? I've read where they have to be made differently depending on which version of the front iso it's being used with. If it will bolt right up to the one from American Sport Bike w/out having to machine anything or otherwise modifying the part, then I would be interested in buying one. Let me know. | ||
| Foximus |
Bike. As far as I understand from how your stating it, the only difference is that the bolt is not long enough for the stenzle, and the frame notch is not quite large enough for the taller mount. However this should not be a problem with my design. If you have problems, i'll gladdly refund you though of coarse. or I'm sure you could just resell it just as easy. I'm not making too many of these. | ||
| Foximus |
Two out, Buell_Lee, and Cyclone Charlie. No holes on either. If you send paypal, please make a note for hole or without, Just so I have a reference once they are all boxed up. | ||
| Bikerrides |
PM sent. | ||
| Marine_wolf2003 |
Hey send me some paypal stuff in an email i pm you the email address | ||
| Foximus |
Here is the second batch. Please note::: WHEN installing these. Take a look at the angle sitting on the top of the front isolator. I used my bike to make the jig, and each of these is at a 12* bend. HOWEVER, that does not guarantee that it matches YOUR bike. A few taps from a hammer will be able to tweak it a degree or two to match yours if necessary.  | ||
| Roderick |
Assuming this will fit an S1? And what exactly is its function anyway? | ||
| Foximus |
Yes. Any tuber. Its function is to eliminate play in isolators preventing the motor rocking fowards and backwards | ||
| Foximus |
And here is this batch finished. Making a shipment out now if anyone wants one.  | ||
| Roderick |
I will take one. Let me know how to pay. Thnx. | ||
| Foximus |
PM sent Roderick. | ||
| Foximus |
Got it Rod! Going to match up the rear hole now and I'll have it shipped out. | ||
| Cyclonecharlie |
Got part today......Thanks | ||
| Foximus |
Thumbs up | ||
| Foximus |
Forgot to mention... Rod. Yours was shipped out today. Though I was unable to beat the noon pickup time... :/ my apologies | ||
| Roderick |
Not a big deal. The gas tank is not even off the bike yet. Too cold to work, even in the garage. | ||
| Foximus |
Everything has been shipped out. Flying out in a few hours to Colorado for the week. If anyone wants one, I'll ship it out when I get back! | ||
| Ghettobirdpirate |
I'll take one if they are still available. PM sent (Message edited by ghettobirdpirate on January 25, 2013) |
