| Author | Message | ||
     Bikerrides |
I want a stenzel bar for a 1999 S3 Thunderbolt. I believe the part would be interchangable on any of the tube frame Buells through 2002, so it isn't model specific unless there's something I'm unaware of. Let me know if you have one available or where I can get one. | ||
| Jayvee |
Where you can get one, retail, is from from the maker: stenzel-parts.de/14321.html or from RR Customizing: r-r-customizing.de/xtshop/index.php?cPath=4_45 | ||
| Rsm688 |
The template to make them is floating around here somewhere. You can make one yourself pretty easy with aluminum stock or have a machinist make one for cheaper than that. Its just a piece of aluminum stock with two holes and a bend. Im in the middle of a full rebuild and when I get my frame back from the powdercoater and get the frame back on the motor im going by my fabricator buddies shop to have him make me one. If your not in a huge rush I can have him make a couple of them. | ||
| Bikerrides |
With a template and instructions, I can make one for my self. My father owned and operated a machine shop for 35 years and it is still pseudo equipped to do some work; I believe there is a mill still up and running. That would be awesome! | ||
| Marine_wolf2003 |
if somebody does happen to make a couple i would like to buy one for my m2 if at all possible | ||
| Foximus |
If anyone needs, I can make a batch of these. | ||
| Cyclonecharlie |
Fox, Depending on the price, I would be interested. | ||
| Foximus |
I cant give a guarantee.... but most likely in the $40-50 range, depending on what I can get the aluminum for. | ||
| Cyclonecharlie |
That's doable, go for it. What is your time frame? | ||
| Foximus |
I could probably find the time to knock some out this weekend | ||
| Buell_lee |
I'd be interested too if you didn't mind posting to Australia | ||
| Foximus |
Ha ha. You pay, and I'll ship it wherever you want. | ||
| Buell_lee |
Kool,Just let me know when you want the cash. | ||
| Foximus |
I'll probably be heading to the scrap yard, then the metal supply shop tomorrow.. I'll see what prices are. | ||
| Marine_wolf2003 |
im down just let me know on a defenate price | ||
| 1eyert |
I'm interested also depending on price... | ||
| Foximus |
Like I said. Most likely $40-50. Mine will not be quite as thick, but will have a ridge Tig'ed into it to be more rigid. Most likely lighter than the Original. | ||
| Cyclonecharlie |
Fox, sent you a PM | ||
| Foximus |
So is that 3 total? Or 4? I'm getting confused. Marine Wolf Buell Lee Cyclone Charlie 1Eye RT (?) | ||
| Foximus |
Just went and purchased all the aluminum. Prices went up a bit. So finalized price will be $55, or $50 if you want to punch/drill your own rear hole to match your engine perfectly... I'll be making a batch tonight/tomorrow. | ||
| Cyclonecharlie |
Fox, What size aluminum did you get? | ||
| Foximus |
3/16". 3/8" is way overkill, and just bad design. | ||
| Rsm688 |
Add me to the list foximus. I will drill the rear hole on mine to fit my bike. Thanks, Spencer | ||
| Cyclonecharlie |
Fox, sent you an email on Jan 11....did you get it? Just want to make sure there's a path for payment,etc. | ||
| Foximus |
I recieved a few PMs. If I didn't reply I must have gotten it confused with another... but yes. Payment would be paypal. Marine Wolf Buell Lee Cyclone Charlie RSM688 - no rear hole 1Eye RT (?) | ||
| Cyclonecharlie |
Fox, The e-mail I sent said no rear hole on mine...Thanks | ||
| Marine_wolf2003 |
ill drill the rear hole on mine to | ||
| Buell_lee |
Fox, I'm happy to put the rear hole in mine also. Thanks Lee | ||
| Foximus |
Rgr. 4 non holes. Last two days have been slammed crazy for me, so I haven't gotten the chance to start on them. Hopefully tonight/tomorrow morning. On a side note, I actually got the chance to finally get my car on a dyno. 359 hp and 820 ft/lbs of torque. No... that is not a typeo. | ||
| Foximus |
Ok. So I finally got around to it. This one is a bit rough, as I was getting the welder set to this aluminum type, But you get the gist of it. The next ones will be cleaner.    |
