| Author | Message | ||
     Rsm688 |
Well I have been trying to sell all these parts individually but it is taking too long and I need to get these out of my way and get a little money to go towards new parts. Im including this all as a package deal for one fixed price so I can get rid of it all at once. Would be an excellent stockpile of backup parts for your tuber. All off my 99 M2 with 9k miles and all in great shape. The bike has been babied and garaged since new. showa front forks upper and lower triple trees (including handlebar mounts/bolts) headlight brackets headlight (factor bulb and HID bulb) molten orange flyscreen (not a scratch anywhere) flyscreen brackets complete front brake setup from the lever/master cylinder all the way down to the caliper (got new pads 500 miles ago) perfect condition front wheel with Continental tire with lots of mileage left and the rotor was replaced 500 miles ago (the new style upgraded one) molten orange front fender (not a scratch anywhere) dash with speedo handlebars brake and clutch lever ignition module plug wires heat shield (has one very minor crack) flasher relay headlight bulb lower belt guard front pulley cover and brace (the brace i sanded down til it was all smooth and not rough lookin from the factory, I then painted the center area where the buell lettering is, then I sanded down the whole flat area to a nice brushed stainless looking finish. It looks awesome with the depressed area black and the outside and buell lettering silver, really makes the letters stand out and looks a hundred times better than it came from the factory) factory horn factory rear turn signals (one of the lenses has a crack) some really nice grips that have plastic outter and inner pieces that were painted to match the molten orange paint side stand switch (the one that wont let you drive if the side stand is down) front engine mount (in perfect condition, I am replacing it with a billet one, its the newer M2/X1 mount that has the provision for the extra tie rod) steering head lock and all the other odd and end small parts and brackets and all that I have that I cant think of All the above parts come with the fasteners used with them as well (like for the flyscreen/brackets I have all of the mounting screws and rubber washers and all) $500 for it all | ||
| Kilroy |
I could use the orange flyscreen if you decide to split these up - Kilroy |
