Author |
Message |
Onahog
| Posted on Tuesday, October 09, 2012 - 06:49 pm: |
|
1995 S2 # 361 All Parts Very Good, Original Patina, 1 owner bike! Also parts from 1996 S2T PM for specific photos! Canada Post Mail Only shipping. Paypal payment USA funds Only! Reasonable SERIOUS offers considered! Here Now, Ebay later! Complete 4 piece body set Original Snap red patina , 8 outa 10. Includes: Fairing with Gust w / Sheild, {1" crack by back bolt hole on right side}, Screens intact. rear tail section with tail light and wiring, screens removed but included{Loose Glue} Tank cover with rubber ring Front fender $1000.00 HSR42 Carb Kit Complete.Was on bike running , now in OEM box with instructions and invoce dated 2002..$150.00 1996 S2T wheels..$300.00 set 9 pin front rotor..$100 L & R fork assemblies..15k miles..newer seals, no leaks..$250..00 set NOS Header # 65247-94...$500.00 1995 Header..On bike..Needs clean up, small scrape but not dented..$150.00 Super trapp...2" $100.00 1- S2 rear caliper and mount, nissan rotor, complete.$100.00 1-rear caliper and mount,brake line,master cylinder complete, no rotor 1995 S2..$125.00 PM wheels with rotors {6 pin front} and very good sportmax tires..$750.00 Low stock handle bars..$75 set Clip on bars with fairing ext..$75.00 #29239-94Y Kn fileter..NIB..$40.00 Complete Carbon fibre Air Cleaner, all harware, very good shape, used filter, $150.00 S2 dash with tack only , wiring..$50.00 1995 S2 dash complete..60k,works,$125.00 2 pc carbon fibre rear gurad and belt lower guard..$150.00 pr Rear sets with controls,pegs,complete, $180.00 Aluminum side plates..$100.00 pr Rear WP shock..$150.00 Swing arm.$75.00 Complete WP front forks, trees legs..$500.00 Front axle with spacers,drive..$75.00 Rear axle , spacers,$75.00 Front Caliper and Hose, complete..$225.00 Oil tank..$100.00 Belt.$50.00 Fairing bracket with headlamp ass.$100.00 Frame with MN title, sig plate,$500.00 Swing arm mount and rubbers etc..$100.00 Corbin seat..Aged..$10.00 Fairing Bags..Very good..$60.00 set Deep Bag lids..$250.00 Narrow Lids..$250.00 Bag Backs..$250.00 Bag Liners..V Good..$100.00 pr Assorted engine mounting hardware, brackets, $100.00 coil and Ign box..stock..$30.00 pr 4 New foot peg rubbers OEM , 2 New shift pegs..$50.00 2 s3 footpegs..$15.00 pr NOS rear 14.5 showa shock..$250.00 1995 engine..60k, ran great, stock cv carb included $1500.00 1995 complete wiring harnesses with SE coil and Module, regulator, sig module, uncut..$250.00 95/96 shop manual..$50.00 NOS 95 Owners manual $30.00 Buell Adventure suit, Size M..$200.00 Buell Nylon Race jacket..$50.00 onahog@yahoo.ca $$$ Talks..BS Walks!
|
Easy_rider
| Posted on Tuesday, October 09, 2012 - 07:37 pm: |
|
How much do you want to keep it together? If that's really not an option, I'll take the Corbin seat for $10. |
Rsm688
| Posted on Tuesday, October 09, 2012 - 07:41 pm: |
|
Pm sent, I'll take the hsr42 carb Thanks, Spencer |
Onahog
| Posted on Tuesday, October 09, 2012 - 07:43 pm: |
|
As ad states, its Being parted out.. First here, then Locally and thru out Canada, then Ebay worldwide. Sorry, the seat is $100 not $10.. TYPO I dont no how to edit it. |
Onahog
| Posted on Tuesday, October 09, 2012 - 08:21 pm: |
|
Carb sale pending $$ Corbin seat is actually $100.00 not $10.00 it is aged , but still useable..Pm for pic. Sorry for the typo. I also have the mirrors, tight,scrathed some tho..$75.00 pr 4 signals,,Rears marked from saddlebags, $75.00 all 4 im SORRY that I have to part this bike out, But Please SAVE YOUR COMMENTS... I dont have the time or enegry to respond to the ineeded remarks.. If ya wanna buy some Decent parts, contact me, other wise..**** Off ,Please..I dont make the rules, I just have to abid by them..HB |
Kmbuell
| Posted on Tuesday, October 09, 2012 - 08:47 pm: |
|
I'll take the WP rear shock! Let me know cost to 27012. Thanks, Kevin |
Onahog
| Posted on Tuesday, October 09, 2012 - 08:52 pm: |
|
Kev..PM me your complete adress onahog@yahoo.ca |
Kmbuell
| Posted on Tuesday, October 09, 2012 - 09:47 pm: |
|
Gotta un-dibs on the shock, wrong one for me. Sorry. My address is kmeath34@gmail.com Thanks, Kevin |
K12pilot
| Posted on Tuesday, October 09, 2012 - 10:00 pm: |
|
dibs on wp shock & in contact for all bag & lid components |
Onahog
| Posted on Wednesday, October 10, 2012 - 01:13 am: |
|
HSR 42 Carb SOLD. I also have 2 complete S2 fuel cells with caps and petcocks ..$100.00 ea |
Easy_rider
| Posted on Wednesday, October 10, 2012 - 06:09 am: |
|
Looking at this a different way, how much for all of the parts, and you don't have to disassemble,box, or ship? Once sold you don't have to worry about farther than the end of your drive. |
Onahog
| Posted on Wednesday, October 10, 2012 - 10:33 am: |
|
Easy R....Pm me an offer if ya like..Im open to ur idea..Hb |
Onahog
| Posted on Wednesday, October 10, 2012 - 11:07 am: |
|
FYI: This Part out will move to Ebay next week..Hb |
Foximus
| Posted on Wednesday, October 10, 2012 - 11:20 am: |
|
I would like to see the headers... the ones that are on the bike. Thank you! |
Onahog
| Posted on Wednesday, October 10, 2012 - 01:47 pm: |
|
Fox..Pm me @ onahog@yahoo.ca |
Onahog
| Posted on Wednesday, October 10, 2012 - 08:29 pm: |
|
Due to the negative activity on this ad , I withdraw this ad and will only respond to decent people I no on BWB.. I dont need abunch of BS from Anyone. I may have a deal happenin on the whole bike going back to the USA or if not it will be listed in Parts on ebay.. If you feel my prices on these parts was too high, well, Maybe you should contact Harley Davidson and ask them to order the part you are looking for,,,Good Luck.. As Forest Gump would say"Thats all I got to Say About that! Im sure my friends on here can relate... Adios..!
|
Easy_rider
| Posted on Wednesday, October 10, 2012 - 10:16 pm: |
|
I spent a good while talking to Hank this evening. As much as I might have wanted to suggest otherwise before, I found him to be a very reasonable, knowledgeable, and practical individual. He's certainly more of a biker/Bueller than I expect I'll ever be. In some ways I think he's just the messenger on this one and certainly doesn't deserve the BS. Let's try to keep the contacts constructive. |
Onahog
| Posted on Wednesday, October 10, 2012 - 11:00 pm: |
|
Thx ER.. After our phone conversation I have decided that while I am pursing my situation with the Homeland Security USA entry issue, I might as well work on getting the title for #361 to CDN as well..Im probably going to have to go to Pembina ND crossing anyhow, so if i dot my Ts correct, #361 might as well come with me and get cleared... It can sit in the corner of the shop,and gather required parts to refresh it back to a running, Good Looking S2 again once cleared...Hopefully it can be. This isnt about money to me, as thats not an issue, its more about time..As stated my health isnt the greatest as the clock and too many wild rides over the last 56 yrs is taking its toll on me...So, hopefully, Im around long enough to Getter done! There is some parts I will not need and will be ebaying them for those who read this.. NOS Header Deep baglids Shallow Lids Fairing Bags NOS Showa 14.5 shock 9 button rotor rear caliper and mount Vg used fork leg assemblies Marchy wheels And an assortment of other stuff.. I need to clean house on Buell and HD parts, as Id hate to leave a mess behind for others to clean up...Im sure Frank S can relate to this. Would anyone no how i can get a letter stating the recalls have bin performed? it has to be from Buell or maybe an HD dealer?? Any input Joe,Frank,Court,Gavin,Dave? Anyhow, Thx again ER, twas good talikng to ya and Good Luck on the Unit we spoke about, and let me no if ya bring er home..!! |
Onahog
| Posted on Wednesday, October 10, 2012 - 11:06 pm: |
|
|
Madmacks
| Posted on Thursday, October 11, 2012 - 10:18 am: |
|
Onahog.. I've imported a few bikes to Canada and have been able to get the recall letter from the Harley dealer. I had to have one recall done on my S1 but they are still obligated to do it if it's required. Also after 15 years from the date of manufacture you don't have to do the RIV on an import. Contact me if you want, maybe I can share my experiences. |
Lynrd
| Posted on Thursday, October 11, 2012 - 10:34 am: |
|
I know on the several S-2s I researched before deciding on Rhonda, I was able to call a local dealership and they looked it up for me. So there's that. Will be watching for some of this stuff on e-bay. Those deep bag lids are tempting. pity I didn't see the stuff about the red Snap bodywork prior to your withdrawing the ad...I'd love to have a second Red set... |
Onahog
| Posted on Thursday, October 11, 2012 - 10:51 am: |
|
Lynrd..Saddlebags set and Header On ebay Madmacks.. The bike is exempt from recalls and RIV as its 17 yrs old..But get this, Now they tell me the previous onwner has to pysically export, then import and pay GST on it..Then he can legally sell it to me. The way it is, he could be charged with illegal disposal in another counrty... Its a F**kin Motorcycle..Unreal eh! Iv had contact with the previous owner and Him and I are gonna work on it..Prob take alot of time and BS tho, but, Im not a quiter. |
Foximus
| Posted on Thursday, October 11, 2012 - 01:18 pm: |
|
so..... no header? |
Onahog
| Posted on Thursday, October 11, 2012 - 02:28 pm: |
|
No used header, but NOS header listed on ebay.Thx,,Hb |
|