| Author | Message | ||
     Masmo |
Hey guys, I am selling a bunch of parts off of a 2000 buell cyclone Two exhaust pipes - One stock exhaust with O2 bung: $150 - One stock exhaust with turnoff welded to end and exhaust bung: $120 - Front Fender: $100 - Seat: $75 - Oil Tank: $30 - Rear Hugger Panel: $30 (has small crack and dent) - License Plate Panel: $30 - Windshield: $40 - Rear Fairing: $50 (has scratch on passenger side) - Rear Shock: $300 (has less then 1000 miles, paid $500) - Muffler: $100 - ((Sale Pending)) - Primary Cover: $50 - Cam Gears: $75 - Starter: $50 - Rockerbox With Arms: $100 for both - Gas Tank: $110 (Has a few scuffs) - Cylinders: $100 for both - Air Intake: $40 (New filter recommended) - ((Sale Pending)) - Dashboard: $80 (Needs speedo bulb replaced) - ((Sale Pending)) - Stock Ignition Module: $30 - Buell Coils With Wires: $30 - Tail Light: $15 - Pistons: $35 - Needs new wrist pin clips - Rear Brake System: $100 - Shifter Assembly: $30 - Voltage Regulator: $25 - Left and Right Controls: $60 for both - Intake: $20 - ((Sale Pending)) - Pushrod Assemblies: $35 for both - Gearbox Cover: $60 - Sprocket: $60 - Sprocket Cover: $25 - Axels: $40 for both axels and hardware - Frame With Title: $300 - Swingarm: $80 - Forks: $250 - no leaks - Wheels: $120 for both. Front tire is new this year and rear tire is two years old - Carb: $175 - ((Sale Pending)) Prices exclude shipping cost. I am willing to do paypal or money orders. I am also selling an O2 sensor and LC-1 A/F monitor gauge for $75 Primary cover, gearbox cover, and rockerbox could use a new paint job. Here is a link to the pictures of these items: http://s1265.photobucket.com/albums/jj504/Kapellu2 /#!cpZZ2QQtppZZ52 Let me know if there are any questions. Figured I would throw the parts on here before putting them on ebay. I tried to put the prices a little lower then seen on ebay. (Message edited by Masmo on September 07, 2012) (Message edited by Masmo on September 07, 2012) (Message edited by Masmo on September 07, 2012) | ||
| Brother_in_buells |
I'm interested in the air intake and intake and what about the carb? also like the flyscreen brackets if you want t sell those separate from the flyscreen? | ||
| Masmo |
Would you do $150 + shipping for the Carb, air intake, and intake? I would like to sell the flyscreen and bracket together though, sorry. | ||
| Brother_in_buells |
I send you a pm to also interested in the foot controls. And i hope you do shipping to the Netherlands? Thanks (Message edited by Brother in buells on September 07, 2012) | ||
| Firstbuell |
dibs on the shifter assy - pm sent dibs on the dashboard - pm sent | ||
| Firstbuell |
undibs on the shifter assy - already have 2 of those!! sorry but I'll re-up - dibs for the muffler - pm sent | ||
| Masmo |
Brother - As for shipping to the Netherlands, just looked on UPS and it is quite pricey, but I have no problem with it. Firstbuell - You have a PM awaiting. I'll scratch the shifter. Your one shifter away from having a hoarding problem. | ||
| Brinnutz |
Dibs on the dash! | ||
| Masmo |
Brinnutz, Firstbuell called dibs on the dash but if he decides not to take it it's all yours | ||
| Billbo |
I'll for sure take the intake (pic #35) if it's still available. | ||
| Marine_wolf2003 |
im interseted in the Primary cover and the gear box cover are those both sides of the motor and would they include the derby cover and the other little round cover | ||
| Masmo |
Billbo, unfortunately the intake is pending for sale right now, sorry. Marine Wolf, the primary and gearbox cover are from both sides of that same engine. The primary does include both covers, I Just forgot to include them in the pictures. | ||
| Billc |
I might be able to use the shock and front forks. Will PM you. | ||
| Masmo |
Item update: Sold Items - Air Intake - Intake Manifold - Foot pegs - Brake Lever - Carb - Muffler - Dash Pending - Forks - Shock - Primary Cover - Gearbox Cover (Message edited by Masmo on September 09, 2012) (Message edited by Masmo on September 10, 2012) | ||
| Marine_wolf2003 |
Pm sent to Masmo | ||
| Masmo |
Hey guys, just updating the list of parts: For Sale Two exhaust pipes - One stock exhaust with O2 bung: $150 - One stock exhaust with turnoff welded to end and exhaust bung: $120 - Front Fender: $100 - Seat: $75 - Oil Tank: $30 - Rear Hugger Panel: $30 (has small crack and dent) - License Plate Panel: $30 - Windshield: $40 - Rear Fairing: $50 (has scratch on passenger side) - Rear Shock: $300 (has less then 1000 - Primary Cover: $50 - Cam Gears: $75 - Starter: $50 - Rockerbox With Arms: $100 for both - Gas Tank: $110 (Has a few scuffs) - Cylinders: $100 for both - Stock Ignition Module: $30 - Buell Coils With Wires: $30 - Tail Light: $15 - Pistons: $35 - Needs new wrist pin clips - Rear Brake System: $100 - Shifter Assembly: $30 - Voltage Regulator: $25 - Left and Right Controls: $60 for both - Pushrod Assemblies: $35 for both - Gearbox Cover: $60 - Sprocket: $60 - Sprocket Cover: $25 - Axles: $40 for both axles and hardware - Frame With Title: $300 - Swingarm: $80 - Forks: $250 - no leaks - Wheels: $120 for both. Front tire is new this year and rear tire is two years old Sold - Carb: Sold and Shipped - Intake: Sold and Shipped - Dashboard: Sold and Shipped - Air Intake: Sold and Shipped - Muffler: Sold and Shipped - Foot Pegs: Sold and Shipped - Intake Manifold: sold and Shipped | ||
| Cyclonecharlie |
Do you still have the A/F monitor gauge? | ||
| Masmo |
I do. Just the gauge and O2 sensor (not the wIres). They are both like new tho, under 50 miles on them. Paid $250 for them off amazon | ||
| Buckley |
PM Sent | ||
| Fasted |
i just need the rear wheel.....will you split? | ||
| Masmo |
Sure, I could do that. So far: Sold - Carb: Sold and Shipped - Intake: Sold and Shipped - Dashboard: Sold and Shipped - Air Intake: Sold and Shipped - Muffler: Sold and Shipped - Foot Pegs: Sold and Shipped - Intake Manifold: sold and Shipped - Stock Exhaust Pipe: Sold and Shipped Pending - Rear Wheel | ||
| Masmo |
- One stock exhaust with turnoff welded to end and exhaust bung: $120 - Front Fender: $100 - Seat: $75 - Oil Tank: $30 - Rear Hugger Panel: $30 (has small crack and dent) - License Plate Panel: $30 - Windshield: $40 - Rear Fairing: $50 (has scratch on passenger side) - Rear Shock: $300 (has less then 1000 - Primary Cover: $50 - Cam Gears: $75 - Starter: $50 - Rockerbox With Arms: $100 for both - Gas Tank: $110 (Has a few scuffs) - Cylinders: $100 for both - Stock Ignition Module: $30 - Buell Coils With Wires: $30 - Tail Light: $15 - Pistons: $35 - Needs new wrist pin clips - Rear Brake System: $100 - Shifter Assembly: $30 - Voltage Regulator: $25 - Left and Right Controls: $60 for both - Pushrod Assemblies: $35 for both - Gearbox Cover: $60 - Sprocket: $60 - Sprocket Cover: $25 - Axles: $40 for both axles and hardware - Frame With Title: $300 - Swingarm: $80 - Forks: $250 - no leaks - Front Wheel With Tire: - New tire this year - $75 - A/F Monitor Gauge and O2 Sensor - $75 - Front Brake System - $100 Sold - Carb: Sold and Shipped - Intake: Sold and Shipped - Dashboard: Sold and Shipped - Air Intake: Sold and Shipped - Muffler: Sold and Shipped - Foot Pegs: Sold and Shipped - Intake Manifold: Sold and Shipped - Stock Exhaust Pipe: Sold and Shipped - Rear Wheel / Tire: Sold, Pending Shipment Pending - Gearbox Cover - Primary Cover (Message edited by Masmo on September 22, 2012) | ||
| Roderick |
If the swingarm is like the X1 alum, which should fit the S1, then I will take it off you. (Message edited by Roderick on September 22, 2012) | ||
| Masmo |
Hmm not sure. It's the stock M2 swingarm. No clue if that would fit an S1 haha. | ||
| Roderick |
Hmm not sure. It's the stock M2 swingarm. No clue if that would fit an S1 There has to be a way to confirm. I know many people have installed the X1 swingarm into an S1. I like the way it looks and would like to do the same to my S1. | ||
| Masmo |
Hmm I stumbled upon this: http://badweatherbikers.com/buell/messages/47623/6 42891.html?1311226904 | ||
| Roderick |
Supposedly some of the early M2 have the same steel swingarm as the S1. Not sure if that is true or not. But if your swingarm is same as the X1, message me payment method. I will take it and matching axle. | ||
| Masmo |
I'll try to make a road trip out to check it out tomorrow. Just have to figure out what size hex I need to remove the swingarm, right now its still on frame. I've heard a T-60 torx works. You wouldn't know off the top of your head would you? I can take pictures of it while im out there too. | ||
| Roderick |
I've heard a T-60 torx works. You wouldn't know off the top of your head would you? Sorry -- No. | ||
| Masmo |
Updated List - One stock exhaust with turnoff welded to end and exhaust bung: $120 - Front Fender: $100 - Seat: $75 - Oil Tank: $30 - Rear Hugger Panel: $30 (has small crack and dent) - License Plate Panel: $30 - Windshield: $40 - Rear Fairing: $50 (has scratch on passenger side) - Rear Shock: $300 (has less then 1000 - Primary Cover: $50 - Cam Gears: $75 - Starter: $50 - Rockerbox With Arms: $100 for both - Gas Tank: $110 (Has a few scuffs) - Cylinders: $100 for both - Stock Ignition Module: $30 - Buell Coils With Wires: $30 - Tail Light: $15 - Pistons: $35 - Needs new wrist pin clips - Rear Brake System: $100 - Shifter Assembly: $30 - Voltage Regulator: $25 - Left and Right Controls: $60 for both - Pushrod Assemblies: $35 for both - Gearbox Cover: $60 - Sprocket: $60 - Sprocket Cover: $25 - Axles: $40 for both axles and hardware - Frame With Title: $300 - Swingarm: $80 - Forks: $250 - no leaks - Front Wheel With Tire: - New tire this year - $75 - A/F Monitor Gauge and O2 Sensor - $75 - Front Brake System - $100 |
