| Author | Message | ||
     Blackm2 |
Need the seal installer for the tuber crank seal, or the Jims tool equivalent. If someone has one they no longer need or if they want to rent it to me.. that would be great too. | ||
| Cupcake_mike |
Good luck finding one, I wasn't able to a few months ago when I did it. I picked up a pvc union that was the same thickness as the stator/sprocket and cinched down the main shaft nut with it in place...then removed it, of course and reinstalled everything....seems to have held, its been 8k | ||
| Blackm2 |
I know Mike, this is like trying to find a pink elephant. You would think that with all the machinists/engineers on this board that someone would make up a batch of them. | ||
| Sleez |
old thread, might be of assistance; http://badweatherbikers.com/buell/messages/47623/4 04148.html?1224408973 | ||
| Sleez |
i just found out this part is not restricted, meaning any purchaser of Kent Moore tools can get it. the hitch? not available until 11/29!!! i found Hands On Tools, ph 866-943-7524, Cathy, $89.05 plus shipping. hope that helps!! |
