Author |
Message |
Hughlysses
| Posted on Wednesday, August 15, 2012 - 08:16 pm: |
|
These parts are all from my 2007 XB12X that suffered a rod bearing failure about 1.5 years ago. All prices negotiable, plus shipping. Paypal payment preferred. XB cams with lifters. Rear intake cam lobe has a slight wear ring around it; other 3 cams are flawless. All 4 lifters looked good. $25 for all 4 including lifters: Here's the rear intake cam so you can see the wear line; you can just barely feel it with a fingernail Set of 4 pushrods; all excellent condition, $20 for all: Pushrod covers, $20 for both: Cylinder Head Bolts (8 total for front and rear) $10 for all: Cylinder Studs (8 total for front and rear). $10 for all Cylinders- both cylinders have some pretty deep scoring; it might be possible to overbore them enough to clean them up. At worst, they'll make really cool wall art or paper weights! $10 for both Intake manifold/throttle body cylinder head flanges. Should fit all 2002-2007 XB's; newer models are different. $10 for both: 2007 oil pump. It has significant scoring on the upper and lower surfaces of the housing from the bearing shrapnel from my engine, but it still produced adequate oil pressure. The shaft and drive gear are fine, as well as the two oil line fittings if you need those. Again, at worst, it'd make a cool paper weight. $10 I've still got a front engine support/Y-bracket with link, $30: Wire guide, goes behind transmission output belt sprocket; 2006/2007 models only, free for cost of shipping!: Velocity stack (rubber) fits all XB's, $10: Center/top engine tie bar- $10: Front belt sprocket cover. For 2008-2010 XB R or S model (different part for Uly). $20 2008-2010 XB12R throttle cables; excellent condition, $20 All 3 oil lines; I believe they'll fit any 2006-2007 XB. Good condition, $30 for all three: Post up or PM if you need more info. |
Cupcake_mike
| Posted on Thursday, August 16, 2012 - 01:24 pm: |
|
I'll take the juggs...can you get me a total shipped to 66092? |
Hughlysses
| Posted on Thursday, August 16, 2012 - 02:09 pm: |
|
Mike- I'll get you a total ASAP, hopefully tonight. |
Hughlysses
| Posted on Thursday, August 16, 2012 - 05:08 pm: |
|
PM sent on shipping the cylinders. |
Hughlysses
| Posted on Friday, August 17, 2012 - 06:33 pm: |
|
Cylinders sold. Everything else still available. |
Hughlysses
| Posted on Tuesday, August 21, 2012 - 08:45 am: |
|
Last call on this stuff. All is still available except for the cylinders. I'll list it on ebay in a couple of days. |
|