| Author | Message | ||
     Beugs |
Who wants to help me get funds together for another stator on my 1125r? All parts where removed from a '99 X1 but some may fit others. Tail bag is obviously not from an X1. Here's a list, pics to follow. I have hotmail and I know pm's are sketchy with that so it might be better to email me, beugs@hotmail.com. first come, first served. If my price is off make an offer, I might be way low on the buell carbon bits for all I know. If you want more pictures I've got 'em. Vance and hines ss2r, maybe 500 miles on it, black front section. $100 + shipping Buell carbon fiber front pulley cover, very good shape, has a couple marks that don't catch a fingernail, should polish out. $60 + shipping Buell carbon fiber shark fin? belt guard, good condition, needs polishing. $45 + shipping stock seat, one small hole on underside, was in a box with spare belt that made an impression, no latch pin. $20 + shipping 9 drive pin front rotor, maybe 200 miles on it, small scratches on carrier spoke. $120 + shipping 6 drive pin front rotor, lots of miles, probably needs new pins, may need new carrier. $20 + shipping rear turn indicators, one lens and screw was donated to a front one after bird hit. $35 + shipping stock dash panel, good condition. $15 + shipping 2 pcIIIs, one dynojet, one k&n. (same thing) unsure of operational condition of either. make offer. stock front pulley cover. $10 + shipping stock drive support arm, polished (needs re-polishing.) abrasion by rear lower bolt hole. $10 + shipping stock black flyscreen, needs repaint. $25 + shipping 2 rear brake lines. $10 + shipping each rear brake fluid reservoir. $5 + shipping tail section, painted but peeling. $75 + shipping. Buell 1125 tail bag, used a few times, one plastic d-ring cracked the very first time I installed it on the bike, just trying to attach the strap. I installed metal d-rings and used those, much stronger. Everything is present including the instructions. works great and holds a lot, but I have a givi trunk now so I don't need this. I don't know what these go for, or even recall what I paid for it, so I'll start at $100 + shipping.                           | ||
| Jhuppdog |
PM sent on V&H. | ||
| Dutch_x1 |
Pm send on the 2 carbon parts and the seat  | ||
| Beugs |
vance and hines and drive support arm are sold, will be shipping tomorrow. carbon pieces, seat, and 9 pin rotor are pending. | ||
| Jhuppdog |
Received the V&H yesterday. Item is in great shape and I have never seen an item packed as well this was. Thanks for the exhaust and taking such time and effort protecting it for shipping. | ||
| Beugs |
No problem, I pack 'em the way I want to get 'em. |
