G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Cupcake_mike Posted on Thursday, June 14, 2012 - 07:08 pm:        Anybody got one? I am gonna replace the seal on my 99 cyclone and I am not gonna pay $100 for a jims I likely won't use again. I would like to buy a used one (for less than the jims) or if someone trusts me, borrow one for a couple days (i'll pay shipping/rental fees/whatever). If I can't find one in the next couple weeks i'll just do it the shadetree way, but figured i'd throw this out there. thanks   Cupcake_mike Posted on Sunday, June 17, 2012 - 12:09 am:        bump   S2pengy Posted on Sunday, June 17, 2012 - 09:16 am:        You can use pvc pipe...   Cupcake_mike Posted on Sunday, June 17, 2012 - 09:11 pm:        I am up on the "other" ways to do it, I was hoping that some one had the tool so I could more easily set it to the right depth   Screamer Posted on Monday, June 18, 2012 - 12:07 am:        There was a change made to the seal and the installation procedure around 2001-2002 (I can't remember for sure). The seal should go in with spring side/open side facing out - which is much easier to do if you have the right tool. I may have a spare which I could lend - I'll check tomorrow night. RR   Cupcake_mike Posted on Monday, June 18, 2012 - 04:33 am:        Thanks! I would appreciate it

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: