| Author | Message | ||
     Bueller83 |
I have Powerstuntworx Crash Cage and 12 o Clock bar for an XB. I had it on my 2008 XB9SX. It should fit any XB except a Lightning Long. I have the mushroom sliderz for the cage and axle sliderz for the rear axle. As for the hardware I am only missing one nut for the cage, the bolts that go into the head, and the rubber padding that goes between the frame and cage. The rubber pieces were just thin and cut out of a sheet of 1/4" thick I think. The bolts that went into the head can be purchased from a hardware shop that has any bolt you can think of just take them the original bolts but add an inch the the length of the bolt. The ones this came with were not aluminum but steel or something. As for the nut just need to match the threads and get an extra nut. Please PM me and I will respond same day. I will post pics in just a bit. This was well over $400 when I bought it all new from Powers and took me forever to get it. $250 + Shipping Not too sure why this pic won't post but this is the link http://i941.photobucket.com/albums/ad253/bueller83/DSCN2103.jpg (Message edited by bueller83 on March 05, 2012) | ||
| Bueller83 |
I also have a rear stunt sprocket that I will let go for very cheap like $50 shipped new never used | ||
| Ratfink |
Oops. Shoulda read before posting. Lol (Message edited by ratfink on March 12, 2012) | ||
| T9r |
Sent a pm | ||
| Bueller83 |
SOLD |
