| Author | Message | ||
     Guell |
Looking for the small toolkit that comes under the seat on the buells xb's. Need the adaptor to remove axles Thanks | ||
| Ratbuell |
If you just need the axle tool, lemme dig. I may have a spare. | ||
| Guell |
That would be great | ||
| Guell |
Bump, would prefer the whole thing, I found one for 23 new, might be the route I go | ||
| Hogluvr |
Guell, if you need to get the axles off a large nut will do the job, I forget the size offhand. The factory tool is basically a big nut with a split ring going around the outside in the middle, so it will fit into a standard socket without going in all the way. |
