| Author | Message | ||
     Nitto12ss |
So the 1125 is going bye bye to make way for a new track bike, so she is getting stripped down and put back to stockish prior to sale. Prices are negotiable to a point and do not include shipping. What I have Polished Keda RT-2, has 800ish miles on it, no dents or major imperfections. Paid $728, would like to get $550. EBR race ecm for Keda pipe, paid $264 would like $200. Will pair the muffler and ECM for $700. A set of painted while wheels, some minor marks from multiple mountings but over good condition. Will come mounted with a front rotor and the rear will need axle kit to run on a street bike (it has a EBR chain drive axle and sprocket mounted) I have a 1125R pulley for it I can include for an additional $50. Would like $300 for the set. Black GPR damper for 1125R, would like $350 50-Dro axle sliders (polished) would like $50 LSL foot control levers, would like $120 ASV F3 standard length/black. This is being sold in conjunction with a Nissin radial master cylinder. The brake lever was ground down and repainted to allow the lever to clear the fairing at full lock. Would like $175. X1 EBR rear wave rotor and X1 Braking rear wave rotor. Both are used and have some minor surface rust. Would like $60 each. Buell Fairing kit, good condition with the only blemish being from when it touched down at the Bowl at Chuckwalla it on the verry bottom and I polished it out for the most part. Paid 400, would like 200.       I'm sure I'm forgetting a few things, but for now thats what I got. Also my bike is at HD so if its not in the pictures on my lawn its still on the bike so I will not be able to ship it to you until I get the bike back from HD. If you have questions call or text at 951 534 4847 Thanks for looking Walter/Nitto12ss | ||
| Nitto12ss |
Braking rotor is sold | ||
| Nitto12ss |
I also have a GSD key less gas cap for sale. Raw silver, $100 | ||
| Avc8130 |
Any pics/details of the brake lever modification? ac | ||
| Nitto12ss |
Not at the moment, I can swing by HD tomorrow and take a few. It looks good, not hacked up if thats what your asking. Vanity is a weakness of mine lol. | ||
| Avc8130 |
I am interested in the levers and MC. I am mostly concerned with what needed to be ground and how it was done. How did the front brake line work out? ac | ||
| Nitto12ss |
This is my XB but it gives you an idea what part was modified. This is my XB, but it has the same MC and C5 levers vs F3.  the lever itself was not touched, it is the part that attaches to the MC that was ground with a dremel and then painted black. It was done because it would hit the front faring support at full lock. | ||
| Nitto12ss |
wheels and both wave rotors have been sold. | ||
| Mtuly |
Can you post a picture of the fairing, I'm interested in it. | ||
| Nitto12ss |
The bike is at HD, I can try and take pics tomorrow. This is the fairing on the bike. The yellow circle shows where it touched down in a turn. Its hardly noticeable though due to its location and the fact that it was buffed out.   | ||
| Skntpig |
Are the wheels straight? Interested in a package price including the rear sprocket | ||
| Nitto12ss |
The wheels have been sold, as well as both rotors. I do still have the sprocket though. | ||
| Roysbuell |
Nitto12ss How did you cut "Buell" into your airbox? | ||
| Nitto12ss |
A dremel, utility knife, file and patience.  If you remove the decal it leaves a perfect residue outline of the letters. Cut the bulk with the dremel, use the knife to get the corners at a perfect 90, and use the file to finish it off. | ||
| Nitto12ss |
Motivation, Keda RT-2 at LVMS. Video does not do it justice though, it sounds completely different in person. http://www.youtube.com/watch?feature=player_profil epage&v=yovtGH9yxhk | ||
| Buellishness |
hmm. | ||
| Nitto12ss |
Keda and EBR ecm sold, pending payment. | ||
| Nitto12ss |
Fairing sold pending payment | ||
| Nitto12ss |
Pics of fairings and brake master/asv levers. The bike is still at HD and filthy. fairing   The fairing has been wet sanded down to 4000 grit at the damaged area. Its smooth, but for whatever reason it will not shine like the surrounding areas. Like I said though, its hardly noticeable when on the bike. Master and levers Clutch, untouched/modified.  Master, painted black. Lever ground down to allow clearance of fairing stay.   | ||
| Sticks |
Front MC still for sale? Let me know and I'll paypal or whatever. I've been searching for one of these damn things. Email me at Martysticks@gmail.com for details please. Thanks! | ||
| Nitto12ss |
Yep, its still for sale. 175 + 10 for shipping. Paypal is nittordsorange@yahoo.com, please send payment as gift or add 3% to the total. Also this is still attached to the bike which is at HD getting fixed under warranty so I cant ship it until I get the bike back(could be a week or two at the rate things are going) You can hold off on the payment until I can ship as long as your committed to buying them. | ||
| Nitto12ss |
Fairing and master/levers sold |
