| Author | Message | ||
     Bearracing |
 Items need to go to make work space for build project. Please make decent offer with shipping and i will get back with you ASAP thanks!. 1. Buell Xb sub frame with seat latch cable 2. Buell xb swing arm with hugger and guards 3. Tuber front wheel with rotor 4. XB kick stand 5. Canister 6. Left firebolt mirror good shape no mount just and mirror 7. XB belt tensioner 8. Used front rotor mounting hardware 9. XB throttle body with fuel line needs a little work a some small parts items to be complete 10. Steel rear brake line 11. License plate bracket 12. Tail light with wires 13. left clutch lever 14. Belt sprocket with nut 15. Rear brake and turn signal wires | ||
| Helltaco |
Can you clarify what these parts are and what they're off of? 5. Canister 10. Steel rear brake line Is this just the hard line from a brake or a braided stainless hose? | ||
| Bearracing |
The canister can go under the seat attached to the subframe or some people run the along the side of the motor. It's for emissions if I remember right. Brake line is just a braided line for the caliper to the master for the rear brake. Parts are off a Buell xb. | ||
| Bearracing |
Pm returned on sub frame thanks. | ||
| Bearracing |
Pm returned on tensioner.. Thanks! | ||
| Littlebuggles |
Bear, how much would you like to get on that front pulley, locking plate and nut? would you go $15 and shipping or is that outrageously under value? Helltaco, use that rear line on your M2 with a XB brake light switch in place of the stock line on your bike, it'll improve feel and be much easier to bleed (since the switch won't trap air bubbles like a stock tuber line). It would be a lot less expensive than the custom line and XB switch I went with. Evaporative emissions catch canister, I thought those only came on California models. -Mike | ||
| Bearracing |
Tensioner sold Littlebuggles how about $20 shipped paypal bearracing@yahoo.com pm me your shipping address. | ||
| Bearracing |
Pm returned on sprocket to UK. | ||
| Bearracing |
PM returned on front wheel and sold pending payment. Thank you | ||
| Littlebuggles |
I'm good with that, I'll forward the funds later tonight. Unless the guy in the UK is in dire need. I want one as a spare to lighten up off the bike. Sent the one I had to another Bueller who needed one cheap to get his S1 back on the road. | ||
| Bearracing |
UK guy has made payment for front pulley/ sprocket plate and nut. Sorry Littlebuggles didn't hear back from you in time. Will ship out later this afternoon. | ||
| Bearracing |
Front wheel sold pending payment arrives. | ||
| Bearracing |
Updated picture of parts that are left to be sold.  1. Buell Xb sub frame with seat latch cable 2. Buell xb swing arm with hugger and guards 3. XB kick stand 4. Canister 5. Left firebolt mirror good shape no mount just the mirror and stem with rubber 6. Used front rotor mounting hardware 7. XB throttle body with fuel line needs a little work a some small parts items to be complete 8. Steel rear brake line 9. License plate bracket 10. Tail light with wires 11. left clutch lever 12. Complete rear brake and turn signal wires with connectors | ||
| Buellblastrider |
condition of swingarm? | ||
| Merc16 |
What year is the throttle body from? | ||
| Bearracing |
Swing arm condition is = its straight, mounting holes matched perfect to frame. Light wear a tear vibration marks. Latch cable is good. Throttle body from a 06 xb does need one or two parts to be complete. Make offer with shipping! | ||
| Bearracing |
Pm returned on throttle body. | ||
| Arctic9r |
pm sent on kickstand. will pay with paypal as "gift" | ||
| Bearracing |
Pm returned about kick stand.. | ||
| Bearracing |
Kick stand sold.... Thanks | ||
| Bearracing |
Pm's returned thanks.. | ||
| Bearracing |
Pm returned on swing arm, subframe and throttle body... Kick stand sold and shipped, all other items still for sale make offer need this stuff gone! | ||
| Debueller |
Recieved the belt tensioner. It looks to be in very good condition. How much use has it seen? Thanks, Bear Jerry | ||
| Bearracing |
Very little, changed to chain drive. So you should get a lot of life outta the bearings. Thanks much and ride safe! | ||
| Bearracing |
All items in lower picture other than kick stand still for sale! Make a shipped price offer... | ||
| Bearracing |
still taking any low offers on the rest of this stuff..shoot me a price!! | ||
| Bearracing |
bump for the weekend.. make offers on this stuff. Need it off my garage floor..Gos to ebay on monday. | ||
| Bearracing |
Throttle body with fuel line sold pending payment arrives this evening. Thanks other items still available.. Make offer. | ||
| Bearracing |
Throttle body with fuel line sold, thanks Swingarm, subframe, tail light with wires, bracket, mirror, brake line, canister,lever, & used rotor hardware all still available till tonight. As I may be posting it to eBay. I can ship internationally as long as you pay all shipping costs. Send me a offer. Thanks Go Buell and ride safe! | ||
| Guell |
70 shipped on the swingarm? |
