| Author | Message | ||
     D_adams |
I still have a few left, $1200 shipped. They are complete motors with stators and throttle bodies. Go on the assumption that they would need to at least get torn down and inspected. As far as I know, they were running when pulled from the chassis, although they have been sitting for more than one year. They will come with a bill of sale and will be shipped via freight truck. I will try to post a pic of one in a bit. | ||
| D_adams |
I also just checked on ebay to see what they're going for, looks like the average is $1200 + shipping ($275?) so this will save you a little. | ||
| Kenm123t |
what years if you Know | ||
| D_adams |
Most will probably be 08's, but it's possible there's an 09 or 2 in the mix. I doubt there are any 10's, but anything is possible. I do not have these in my possession, I am just assisting with the sale. On shipping, it will be via freight truck (common carrier) so you'll need access to a loading dock. If you require home delivery, the shipping cost will be a few hundred more than what's quoted. If you're interested, PM me for contact info. | ||
| D_adams |
If you have not heard back from me, you need to check your profile settings and make sure your email address is set correctly. | ||
| D_adams |
Still have a few left. | ||
| Curve__carver |
The email comment might be for me...mine was an old address. | ||
| Rex |
I assume they come with title certification? Unless you have the paperwork, Arizona does not let you tag and title it. | ||
| Rex |
do you have serial number certification? arizona does not let you title and tag bikes without the number certification. REX | ||
| D_adams |
The motor will come with a bill of sale only. Only the frame requires an actual VIN & title, so if I parted out a bike, only one guy is going to get a title and that's the guy getting the frame. Everything else is incidental and normally would not get any more than a bill of sale, if even that much. Wheels, electronics, etc don't usually get one. You should not need any more than your original title and the bill of sale for the motor to get it titled. If you want one, send me a PM and we can work out the details. | ||
| Battyone |
Hi Dan, any left? where are you? and is collection possible? I'm in uk but have an associate touring various states mid november, then again december til early january, shipping a container in january.If i can locate engines on his route he'll collect and ship. Possibly after 2 at the right price regards Nigel | ||
| D_adams |
Yes, there are more available. PM sent. | ||
| D_adams |
One more bump, just checked on what's remaining. At this point, it looks like there are only 4 more left. | ||
| Dennis_c |
PM sent Dennis | ||
| Battyone |
Just like to say thanks to Dean,for hooking me up! my 2 motors were collected last tuesday. Anyone thinking about buying one get in quick before they're gone. We're talking complete motors,throttle bodies and engine loom, for the price breakers are charging for one with bits missing. A proper Gent cheers D  | ||
| D_adams |
Bump, there's a few left. | ||
| D_adams |
Bump. | ||
| Dennis_c |
D_adams Thanks got my motor runs great dennis |
