Author |
Message |
Big_deezul
| Posted on Saturday, September 17, 2011 - 09:14 am: |
|
quick change chain drive swing arm $1200 2 sets of wheels set up for quick change swing arm 6mm rotors $400 each set ZTL2 caliper $200 quickchange brake line $150 pipercross air filter $45 open air box set up $30 fairing stay $45 43mm traxxion forks $400 41mm forks with race tech cartridges $850 ohlins shock $650 stock shock resprung and valved by racetech $350 brembo master cyl $275 ohlins damper $350 woodcraft rear sets $200 fully programable DDFi2 ecm $350 2007 race motor 101 hp fresh top end e-mail for details $1500 Sebimoto full fairing kit with wind screen $500 sprockets out the wazoo!$25 ea EBC brake pads for ztl2 $50 07 and 08 wiring harness $100 ea anything else you need...just ask! |
80rs427
| Posted on Saturday, September 17, 2011 - 10:47 am: |
|
dibs on the fairing stay.... |
Mark_1
| Posted on Saturday, September 17, 2011 - 06:24 pm: |
|
pm sent TY |
Firefighter1c57
| Posted on Saturday, September 17, 2011 - 06:46 pm: |
|
PMed you |
Smoke
| Posted on Saturday, September 17, 2011 - 07:45 pm: |
|
pm sent for brake line. tim |
Deanh8
| Posted on Saturday, September 17, 2011 - 09:58 pm: |
|
Dibs on brake pads resets and I need a sprocket |
Herb28
| Posted on Saturday, September 17, 2011 - 10:10 pm: |
|
can't believe I'm asking this but is the swing arm for the later years (will it fit 2009) and would you break up the wheel sets with just the rears? Could use some sprockets also, what you got? |
80rs427
| Posted on Saturday, September 17, 2011 - 10:48 pm: |
|
I'm going to pass on the fairing stay. I'm trying to find a stock piece..... |
Herb28
| Posted on Sunday, September 18, 2011 - 12:17 pm: |
|
I'll take the fairing stay then. How to pay? thanks, Herb |
Big_deezul
| Posted on Sunday, September 18, 2011 - 09:32 pm: |
|
SS drummer $450 XB12 Header light scuff $150 DDFI2 Erik Buell Racing ECM with Drummer map $250 DDFI3 fully programmable Erik Buell Racing ECM $400 Seat $45 Rear SS brake line $35 1125 master cyl $75 |
Dmfb88
| Posted on Sunday, September 18, 2011 - 10:27 pm: |
|
Do you have any rear brake rotors in good shape that would fit my 1125r? |
Live4moto
| Posted on Tuesday, September 20, 2011 - 01:12 am: |
|
might be interested in stock shock, how much do u weigh? How many hours since revalve? |
Johnnyvii
| Posted on Wednesday, September 21, 2011 - 12:00 am: |
|
Are the rear sets standard or GP shift? Ever down? Any spare bits for them? |
Firefighter1c57
| Posted on Tuesday, September 27, 2011 - 10:45 am: |
|
Did the rearsets ship yet? |
Ah555666
| Posted on Tuesday, September 27, 2011 - 11:41 am: |
|
You get the programmable ecm sent out? |
Greerstyl
| Posted on Tuesday, September 27, 2011 - 11:07 pm: |
|
Very interested in the ohlins damper and rear sets. Please email pics and pay info to greerstyl@gmail.com |
Big_deezul
| Posted on Thursday, September 29, 2011 - 06:59 pm: |
|
quick change chain drive swing arm Sold 2 frt wheels with 6mm rotors $150 each ZTL2 caliper sold quickchange brake line sold pipercross air filter $45 open air box set up $30 fairing stay sold 43mm traxxion forks $400 41mm forks with race tech cartridges sold ohlins shock $650 stock shock resprung and valved by racetech $350 brembo master cyl $275 ohlins damper $350 woodcraft rear sets sold fully programable DDFi2 ecm sold 2007 race motor 101 hp fresh top end e-mail for details sold Sebimoto full fairing kit with wind screen sold sprockets out the wazoo!$25 ea EBC brake pads for ztl2 $50 07 and 08 wiring harness $100 ea SS drummer $450 XB12 Header light scuff $150 DDFI2 Erik Buell Racing ECM with Drummer map $175 DDFI3 fully programmable Erik Buell Racing ECM $400 Seat $45 Rear SS brake line $35 1125 master cyl sold Frame (w/paperwork) that has been set up with Erik Buell Racing pucks, XBRR style sliders, expanded fuel capacity, quickfill set up and vent $600 subframe has been lighteded $60 Fuel pump $100 43 and 41mm tripple clamp sets $100 each (Message edited by big deezul on September 29, 2011) (Message edited by big deezul on September 29, 2011) |
Blownharley
| Posted on Sunday, October 02, 2011 - 03:52 am: |
|
What year is the frame? |
Brother_in_buells
| Posted on Sunday, October 02, 2011 - 06:00 am: |
|
Man that was for sure a good looking bike!
|
Big_deezul
| Posted on Monday, October 03, 2011 - 05:39 pm: |
|
thanks man! Frame is a 2004 |
Big_deezul
| Posted on Thursday, October 06, 2011 - 10:55 pm: |
|
quick change chain drive swing arm Sold 2 frt wheels with 6mm rotors Sold ZTL2 caliper sold quickchange brake line sold pipercross air filter $45 open air box set up $30 fairing stay sold 43mm traxxion forks Sold 41mm forks with race tech cartridges sold ohlins shock Sold stock shock resprung and valved by racetech $350 brembo master cyl sold ohlins damper $350 woodcraft rear sets sold fully programable DDFi2 ecm sold 2007 race motor 101 hp fresh top end e-mail for details sold Sebimoto full fairing kit with wind screen sold sprockets out the wazoo!$25 ea EBC brake pads for ztl2 $50 07 and 08 wiring harness $100 ea SS drummer $450 XB12 Header light scuff $150 DDFI2 Erik Buell Racing ECM with Drummer map $175 DDFI3 fully programmable Erik Buell Racing ECM $400 Seat $45 Rear SS brake line $35 1125 master cyl sold Frame (w/paperwork) that has been set up with Erik Buell Racing pucks, XBRR style sliders, expanded fuel capacity, quickfill set up and vent $600 subframe has been lighteded Sold Fuel pump $100 43 Tripple Sold 41mm Lower tripple clamp sets $60 |
Xb12randy
| Posted on Tuesday, October 18, 2011 - 05:00 pm: |
|
I sent you a PM about the SS Drummer |
Schwara
| Posted on Wednesday, October 19, 2011 - 02:05 am: |
|
sending PM on open airbox set up |
Jetbuilder
| Posted on Thursday, October 27, 2011 - 05:51 am: |
|
Have anything left? archangellr@gmail.com |
Stevedplumber
| Posted on Thursday, October 27, 2011 - 07:03 am: |
|
sending pm on the xb12 header pipe |
Jlrenken
| Posted on Friday, November 18, 2011 - 11:44 pm: |
|
do u still have the exhaust and ecm for it yet. if so will it work with a xb12scg 08. and what are you asking for it. thanks |
Schwara
| Posted on Monday, November 21, 2011 - 12:06 pm: |
|
any chance you still have the open airbox components? |
Big_deezul
| Posted on Wednesday, November 23, 2011 - 07:07 pm: |
|
I still have the header, ecm and open air box...please e-mail |
Schwara
| Posted on Wednesday, November 23, 2011 - 10:24 pm: |
|
Sending PM |