| Author | Message | ||
     Ravyn |
Up for sale is my 2009 Buell 1125CR. One of Erik Buell's greatest creations. Beautiful aluminum frame houses 5.3 gallons of fuel. Rim perimeter brake with 8 piston caliper stops the bike like a freight train. Belt drive, side draft radiators, 54.5" wheelbase, and a modern, liquid cooled, 140 HP v-twin engine round out the package. Mods include: - Erik Buell Racing computer - FMF Apex titanium exhaust - Quick release seat pins - Flushmount turn signals - Custom rear tail tidy - Factory fat bar kit - Factory heated grips - Michelin Pilot Powers front and 190 rear Bike has 11k miles and comes with all the stock take offs, as well as owner's manual, tool kit, and shop manual. New brake pads all around and fresh synthetic oil change. $5900 Please call/email to see the bike. 646.734.8364     | ||
| Andymnelson |
Not to be picky, but it has 146 hp. Oh, and freight trains don't stop very quickly  Beautiful bike and good price, good luck with the sale! | ||
| Ravyn |
Andymnelson you're absolutely correct. I should have said 150 hp and stops like a bullet shot into a sand bag. | ||
| Andymnelson |
Bump for a bike that longs to be in my garage, but alas I can not afford it right now.... | ||
| Froggy |
Ya know Andy, if a blue 99 X1 with stripe just happens to end up in my garage, you might just happen to find a stack of cash to buy this... Just saying  | ||
| Froggy |
Oh, and this bike is close to me, so it can easily be worth the round trip drive | ||
| Ravyn |
Perfect  | ||
| Andymnelson |
Derek said I can't trade his bike in order to get myself a CR.  | ||
| Ravyn |
Here's a walk around at idle. http://youtu.be/dS7SRQD1cWo?hd=1 | ||
| Greerstyl |
hey ive sent you an email once. im in boston would you be willing to meet halfway? also, was the bike down on the right side? looks like scratches. thanks | ||
| Ravyn |
Hi Greerstyl, thanks for the interest. I would like to say that I could meet you halfway - say Hartford - but my schedule right now is not as agreeable. You are correct. The PO had a losing battle with gravity. Both pod covers are scratched. Never really bothered me, and since I ride in the city, I knew as soon as I replace them some fool is going to knock the bike over. The more I ride this beast, the more I'm thinking of hanging onto it. | ||
| Ravyn |
All PM's replied to. Still available. | ||
| Buellsruell |
"Oh, and this bike is close to me, so it can easily be worth the round trip drive : )" TrooDAT™, Frank.  Hmmm.... | ||
| Ravyn |
Forgot to mention that I also have the factory color matched seat cowl   | ||
| Velocity |
Ravyn, wet sand your pod cover and buff it out with compound, then do the foam pad compound, then hand glaze.... good as new. I have done a few. Scott | ||
| Avc8130 |
Care to sell any of the aftermarket? FMF? High bars? ac | ||
| Ravyn |
Thanks, Scott. That's a great tip! AC - that might work. It could make the bike more affordable to someone if I sell the goodies separately. PM me what you're interested in. | ||
| Buellsruell |
"For what it's worth", I'm quite interested in this bike, but probably wouldn't be without the high bars/pipes... If all goes as planned, I will be contacting you in about a week to arrange to come down and take her away. | ||
| Ravyn |
It looks as though Buellsruell isn't the only with that sentiment. Got a couple of PM's to that effect as well. Bike will stay as is - with all the good stuff  Of course, if one were so inclined to have me hold the bike for them, deposits are always welcome - just sayin' | ||
| Buellsruell |
I just need to finish up a big roof job I'm in the middle of...and I never "count my chickens before they're hatched", if you know what I mean. I bought the same bike 1yr ago. Sold it like 3 months later and now I miss her terribly. The new owner promised me he'd give me first dibs if he sells her, but I guess he forgot....lol. | ||
| Ravyn |
Sure would be nice to sell it to a former CR owner  | ||
| Ravyn |
SOLD |
