| Author | Message | ||
     Prior |
It's that time of year for Spring cleaning and I've finally gotten around to unpacking some of the boxes from our move and need to get rid of some stuff from the garage... Also have some S3 parts left that I'll be posting on here as well. I prefer Paypal, gift payment if ya trust me, and I'll get shipping quotes for some of the larger stuff, smaller stuff I'll just toss in the mail USPS. PM me with any questions and thanks for looking. This time around, working towards the tire changer fund so I can fix Reep's tires  | ||
| Hybridmomentspass |
Alex, please let me know what you do have left/for sale. | ||
| Prior |
Garmin Quest (the original one). Waterproof, bullet proof, simple tech. Includes car mount and charger, RAM cradle for the bike and home made 12 v to 5 v power supply so you can hook it up to the bike and charge on the go, as well as a copy of City Navigator 2008 (software is registered online and I also have the unlock codes written on the inside of the sleeve. The rest of the RAM mount system (arm and handlebar mount) is about $15. Unit is in good shape, has a few small scratches on the face and some bug guts by the antenna, but works great. I'll even leave in a few cool Waypoints for the next owner to find. Selling this as I upgraded to a new unit with built-in WIFI etc. Asking $75, shipped.   Uly brake rotor, 5 mm version. This has about 8k miles, and was replaced by an Erik Buell Racing rotor. Includes original mounting hardware, which I'd replace. This rotor is in good shape, never had any pulsing issues or brake pad deposit problems with it... $50 shipped  Central Pneumatic (Harbor Freight) Earthquake impact sockets, 1/2" drive, 10-27mm. These are Cr Mo sockets, Taiwan made, but really not all that bad. I have s set on my shop truck that I've used for two years rattling bolts off of excavators and haven't had any issues with them. I picked these up a few month ago for home and haven't used them, and recently found a Gear Wrench set that goes from 8mm-36mm I'll be able to use more. Asking $20, will ship for $5 without the case (flat rate box), or $10 with case. (Message edited by awprior on February 28, 2011) | ||
| Prior |
More bike parts... All of the tuber parts, unless noted, are from a 97 S3(T) S3 Ign switch with Key- $30  Tail section- has a few cracks and really ugly paint but could likely be redone. $50   Tube style swingarm- $65  Engine mounts- $60  S3 Frame- $150- includes a title, but is not notarized by the previous owner(s), so would need to get a new title in order to transfer...   Brembo rear caliper- $30  Handlebar switches etc- $25  Front master cylinder/lever- $35  Rear master cylinder and brand new spare plunger- $25  Silver rear wheel- $50 Wire harness- cut at rear turnsignals, other than that looks complete- $25  | ||
| Skinstains |
Is the chain still available ? If so...dibs... Can you fit it in a flat rate box so I don't get murdered on shipping ? | ||
| Buell_lee |
I'll take the Brembo caliper if you are willing to send it down to Oz. | ||
| Prior |
Shipping to Oz is no problem, I shot you a PM to get address info etc. Prior | ||
| Prior |
Brembo caliper is sold, boxed up and headed to Oz. Kryptonite chain is also sold. | ||
| Prior |
Missed the picture of the sockets up above:    | ||
| Tq_freak |
Where you at in NC? thinking about the frame but shipping would be a killer | ||
| Brinnutz |
How much on them sockets?? | ||
| Prior |
Will, I'm in Kernersville, about 160 miles from you- agree that shipping would be killer. We could arrange to meet somewhere in between, Charlotte etc. if you'd like. Most of March is VERY busy for me with work travel, but could work something out for the next week or so or in April sometime. Wilson, Asking $20, will ship in a small flat rate box for $5.20 without the case, larger flat rate box if you want the case as well. Like I said up top, they're imports, but really aren't bad. I think I paid $40 for these and never used a single one. | ||
| Arctic9r |
have you sold the rotor? If not i'm interested. | ||
| Prior |
Rotor is still available. | ||
| Rotzaruck |
Alex Is that switch just a 3 position that would come out of that mount and not care if it was on an S3 or an M2? I'm gonna start getting tired of unplugging that thing every time I want cut it off. Of course, that has got a little easier since I finally remembered I have a kill switch, never used the thing before. | ||
| Prior |
Ed, It's a HD 71421-94, which is the exact same thing I have on my M2. It's just mounted to the bracket. Should work just fine for any of the tubers or a Harley. Alex | ||
| Hybridmomentspass |
Alex, do you still have the GPS? | ||
| Prior |
Garrett, GPS sold last night, sorry. If there's anything up above that you need (and I can also email you the list of the rest of the stuff that I have), give me a call and we can have a yard sale. I do have some other parts about, EBC rotor and a few other things, but right now they are garage art. | ||
| Buellbo |
Prior, I'd like to buy the handle bar switches and ignition switch. The shipping will be to 34250. Please PM a total price W/ shipping. | ||
| Prior |
Buellbo, PM sent. | ||
| Buellbo |
Prior, I got the handle bar switches and ignition switch, Thanks. | ||
| Buellbo |
Prior, I am interested in the front engine mount, it will fit a n S1W won't it? Is it uncut, the support for the stock air cleaner box? If so give me a price W/ shipping. Thanks | ||
| Prior |
Buellbo, Shot you a PM back- sorry for the long delay in getting back to you, been on the road for work the past two weeks. Prior | ||
| Buellbo |
Prior, I got the engine mount. Thanks, Mike. |
