| Author | Message | ||
     Phelan |
I am parting out my S2. I'm tired of working on it and I want to make a coffee table out of the frame. Here's some of the stuff I have for sale. They are all very dirty. Prices do not include shipping XB wheels- $200 for both. Will include rear rotor and tires. Front needs replaced, rear has about 2500 left in it. Wheels both need to be sandblasted, and the front has a small square of material missing around the left bearing area where I attempted to fit a speedometer drive. It doesn't affect anything and isn't very noticeable, and could be filled in with some JB weld or something very easily. XB 65 tooth rear pulley- $30, nothing wrong Erik Buell Racing front rotor- $60, has 2K miles on it. Has some surface rust from not being ran in 2 months but that will come off the first time around the block. '03/'04 XB front forks- $165 needs fork seals. These are the ones that will slide into the stock tuber triple trees. XB front axle- $15 XB front caliper- $35 XB LSR style carbon fiber front fender- $40 painted black, has a crack behind fork that needs repair as well as extra holes that need filled (where I redrilled to lower the fender height). XB rear axle-$15 S2 standard handlebars- $30 S2 gas tank- $75 comes with petcock and cap. Will fit other tubers as well. S2 seat- $35 fiberglass base is cracked S2 oil tank- $40 no leaks; lower inside seam has been repaired with jb weld There will be more stuff once I start to tear the motor down. | ||
| Prior |
Is the rotor the 6mm version? Dibs on that... Alex (Message edited by awprior on December 04, 2010) | ||
| Phelan |
Yup, 6 mm version | ||
| Brother_in_buells |
I think this brand is a far better coffee table!  there are also a lot more types and models of this brand to choose from. ps: this model is today,s favorite!    | ||
| Easy_rider |
I'm interested in the handlebars and the oil tank. PM on it's way! | ||
| Phelan |
Handlebars and oil tank sale pending. Also have Brand New S2 rear brake line $20 '99-'02 aluminum swingarm, bare but with bearings- $35 | ||
| Pontlee77 |
if alex doesen't take the rotor i Will, do you include the mounting hard ware? | ||
| Phelan |
Rotor sold this morning, sorry. | ||
| Pontlee77 |
early bird catches the worm | ||
| Cvc |
you sell it all? PM sent |
