| Author | Message | ||
     F_skinner |
One blue small one.(standard size)   One large one (3 inch intake) scratched up a bit   75 each, includes shipping in the lower 48. Frank | ||
| F_skinner |
I have no hardware for these. | ||
| Thejuicer |
Man if i didnt already have a spare filter i would be all over that 1st one.... | ||
| Whitetrashxb |
As a new tuber owner i'm trying to edjumicate myself as much as possible with them, can you explain the size differences? is it diameter or length of tube, or the filter itself? can't tell by the pics.. Also, what hardware would i need to fit one to my S1W? Sorry for the questions.... thanks, James | ||
| F_skinner |
It is the diameter. I had the blue one on my S1W for a while until I found the race filter and cover for it. I have no idea how the large one attaches. It was on a 98 S3 with stock carb... For the blue one you would need longer screws to attach to the stock carb and a gasket I believe. Fran | ||
| Guell |
the 2nd one is a hbbi (harley big bore intake) It should attatch to a billet velocity ring that bolts to the carb. I ran one on my m2 for a couple of years, not a bad set up, and cheaper than a force. Hope that helps Frank | ||
| Whitetrashxb |
i'll take the blue one, pm coming | ||
| F_skinner |
Blue one is sold, 50 for the silver one which includes shipping. f_skinner at yahoo dot com. Frank | ||
| F_skinner |
40 includes shipping | ||
| Kfry |
ok so the silver one would it fit a 99 x1 and where would the sensor go? i dont see a port for it on the silver one. can i just not use the sensor? |
