| Author | Message | ||
     Bernhardgrave |
The following parts are off of my 2009 1125R with 980 miles on it. I took apart to customize it and I won’t be needing these parts. Both Silver 47mm Showa front forks – these will fit a standard XB9 or XB12, R or S, that has the 54mm outside diameter upper tubes already (they are the same length) which I think Buell began using in 2006, but you’ll want to confirm. Beef up your standard XB, or in conjunction with the correct rear shock you could lower your Ulysses (pre2008) to XT height or raise your XB 12scg to standard height! I am asking $300.00 for the set plus shipping.  1125R Lower Fairing Kit, part #M2296.1AMMW – I don’t have photos because they are new in the box, and I don’t want to disturb the beautiful packing job. I am asking $200.00 plus shipping.  Upper triple-clamp and bars, no blemishes – I went to the CR handlebar set up - $40.00 plus shipping.  Black 1125R seat cowling – with pillion cover. Nice shape - $30.00 plus shipping (it has to go in a big box so it might be around $40 to ship - ?)  and the piece de (you can't)resist-ence Ohlins BU201 shock for standard height, short wheelbase Buells (XB 9 or 12, S or R) - with remote hydraulic preload adjuster – I bought it off eBay to experiment and see if it could be used somehow on my 1125R, and it can’t, so I am letting it go cheap and chalking up my loss to R&D. It looked nearly new when I got it except for the small scuffs on the spring. I am asking $300.00 plus shipping.  | ||
| Shaggy |
I'll take the: Upper triple-clamp and bars, no blemishes – I went to the CR handlebar set up - $40.00 plus shipping. Let me know where to paypal. Thanks! shaggy | ||
| Shaggy |
I'll also take the" Black 1125R seat cowling – with pillion cover. Nice shape - $30.00 plus shipping (it has to go in a big box so it might be around $40 to ship - ?) PM me about payment. Thanks! shaggy | ||
| Rt_performance |
pm sent fairings | ||
| Rt_performance |
ok pm wont work how much to ship to michigan 48881 email is rtperf@yahoo.com | ||
| Bernhardgrave |
TOP TriplClamp w/bars is SOLD! SeatCowling and pillion cover are SOLD! thanks,} | ||
| Mark_1 |
PM sent on the ohlin bu201 | ||
| Hurricaneleah |
FYI - the 1125R forks are not a bolt on for the XB/firebolt. The 1125 triples fork spacing are 1mm wider. you have to either run the 1125 triples or machine 1mm off of the fork captive axle spacer. I've seen 1125 forks on XB's with XB triples that were not machined, they kinda work but they will bind.... | ||
| Hybridmomentspass |
Needing shipping quote on lower fairings to 27263 Thanks! Please email to garrett.ray.owens@gmail.com | ||
| Dcmortalcoil |
PM sent for fork and possibly the shock if Mark 1 does not take it | ||
| Bernhardgrave |
Thank You Hurricaneleah for the excellent knowledge - I am assuming that Dcmortalcoil read your advice before asking to buy them (I will discuss it with him before shipping). That being said: The Fairing lowers are SOLD. the Ohlins is SOLD | ||
| Bernhardgrave |
Sorry EVERYTHING IS SOLD. Thanks Badweatherbikers |
