| Author | Message | ||
     Loud_and_low |
From Buell website: 7/8 inch axle wrench (hex). Allows using a box end wrench or socket on fasteners in front and rear axles and swing arm pivot shaft. Anybody have an extra to get rid of? | ||
| Fuzzy |
i use a 1/2" coupling nut. just wrap a rubber band around the middle to keep it from going all the way into the axle. $2.19 at enco http://www.use-enco.com/CGI/INSRIT?PMAKA=407-4562&PMPXNO=940776&PARTPG=INLMK3  | ||
| Loud_and_low |
Good idea. Thanks. | ||
| Ratbuell |
Should have been in your little blue (or black) tool pouch, under your seat...all Buels except the Blast ship with 'em. | ||
| Loud_and_low |
I have a complete tool pouch, but want one for my toolbox. I'm weird that way. If I don't find one before, I'll go with Fuzzy's approach for my toolbox. Thanks. | ||
| Johnnyvii |
My 13/16" spark plug socket has the correct size male hex on the closed side. I put an extension in through the front of the socket and use it backwards. Fits perfect. Kind of hard to explain. If that doesn't make sense, go look at a spark plug socket and it might. If not, let me know and I'll post a pic. | ||
| Loud_and_low |
Johnny, I tried that. Works perfectly. Thanks for the great money saving, and space saving in the tool box, tip. THANKS!! |
