Author |
Message |
Xb1221
| Posted on Friday, July 02, 2010 - 10:53 pm: |
|
I have some spare parts collecting dust from last years purchase. Item #1 is a full Beson race exhaust. This is the Bomb!! Ti water buffalo headpipes w/ S/S can with 3" outlet. Comes w/ the stock S/S small engine mount and new springs. Use your exhaust clamps. Fuel map from the 1169cc motor is also included. These motors were built w/ 3 13/16" bores and 3.1" strokes at 10.5:1 compression ratios. This pipe will turn car alarms on!! Bike was claimed to make 96 rear wheel HP with this pipe. Asking $750 for this item. Item #2 is a 3 piece Sharkskinz bodywork kit complete w/ mounting hardware. No windshield, scoops or under tail pieces. Kit is not perfect having endured 3 years on the track. Some repairs, cracks and a hole in the bellypan from the front tire rub. Cut for the Beson pipe listed above. No sidestand cuts. Has all graphics from the Team and sponsors still under the clearcoat. Asking $450 for this item. Item #3 one set of XB silver wheels w/ factory rotors. Rear wheel is modified for the chain drive swingarm. These rear wheels are sleeved for the X1 axle and rear caliper bracket and can be reverted back to stock. Asking $450 for both of these. Pics available on request. Shipping to lower 48 with these prices. It'll cost more outside this limit. Thanks for looking. |
Jakecheez
| Posted on Saturday, July 03, 2010 - 12:41 am: |
|
Pm sent |
Xb1221
| Posted on Friday, July 09, 2010 - 07:15 am: |
|
pics added... Beson exhaust
Sharkskinz 3 pc kit
XB Wheels w/ rotors. Rear wheel sleeved for chain drive conversion.
|
Xb1221
| Posted on Wednesday, July 14, 2010 - 06:36 pm: |
|
Bump... |
Xb1221
| Posted on Friday, July 16, 2010 - 07:58 am: |
|
Now also on Craigslist... Beson exhaust: http://buffalo.craigslist.org/mcy/1845780790.html Sharkskinz: http://buffalo.craigslist.org/mcy/1845790012.html Wheels w/ rotors: http://buffalo.craigslist.org/mcy/1845792816.html |
Xb1221
| Posted on Tuesday, July 20, 2010 - 06:38 pm: |
|
Bump... |
Xb1221
| Posted on Friday, July 23, 2010 - 09:01 am: |
|
Bump again.... Go fast(er) parts... |
Hogs
| Posted on Friday, July 23, 2010 - 11:46 am: |
|
Wheres all the springs and the muffler mount at? |
Sticks
| Posted on Friday, July 23, 2010 - 09:42 pm: |
|
Pssst, hey don't mean to jack but Hogs and XB1221... Are you guys sure the headers are titanium? I only ask because I bought one of these and I'm going to have a 02 port welded in. |
Hogs
| Posted on Saturday, July 24, 2010 - 07:01 am: |
|
Yes they are.Atleast so I was told by a guy that had one welded as well , as he had a hard time to get small welding rods , for what He wanted to use to weld with... |
Sticks
| Posted on Saturday, July 24, 2010 - 12:01 pm: |
|
Thanks, bump |
Xb1221
| Posted on Tuesday, July 27, 2010 - 09:17 am: |
|
Bike came to me with the Beson mounted and old rusty springs. See pics. Not wanting to have the springs break and the exhaust headpipes to back off and melt/burn the bodywork....I bought two complete sets of springs for both pipes from a local dirt bike shop. They "r e a l l y" liked the bike.
|
Xb1221
| Posted on Sunday, August 15, 2010 - 05:36 pm: |
|
Bump... |
Xb1221
| Posted on Wednesday, September 29, 2010 - 08:22 pm: |
|
bump Entertaining offers at seasons end. 1. Go Faster Beson Ti exhaust w/ ECU map from 1169cc motor. http://www.badweatherbikers.com/buell/messages/21/ 414181.html#POST1316591 http://www.badweatherbikers.com/buell/messages/21/ 439012.html 2. Sharkskinz 3 pc bodywork kit w/ mounting kit. 3. XB Lightning wheels modified for chaindrive swingarm. thanks- |