| Author | Message | ||
     S2no1 |
RKA bag has sold to SportyEric. I'm going to the garage and cry now. Arvel | ||
| Black9 |
Streetfighter seat, for XB s ,like new...100.00, also Buell tail bag, for XB'S never used 70.00 | ||
| Jsunstar |
LOOKEY, PARTS FOR SALE: ~steel swingarm from s2 with adjusters...100.00 ~aluminum swingarm with adjusters and axle...125.00 ~M2 LOW seat...50.00 gettit if your short! looks new... ~s2 seat 30.00 looks new too! ~Inverted WP forks and triple trees (cast) and clipon bars from 95 s2. (one seal is leaking (easy cheap fix) and theres a few scratces in finish from them laying around the garage... these were for a project i was working on and never got to) ...best reasonable offer on front end. ~POLISHED early marchenesi rear wheel (beautiful)...200.00 These parts are going on the MEELEE that is Ebay if they dont sell in a few days...gettem while they are cheap! I am looking for an electric/air shifter and a dyna 2 step that i would consider trades on... lemme know at jsunstar@yahoo.com thanks, jason | ||
| Mbsween |
S2no1, I'll take the centerstand if you haven't sold it. Let me know matt | ||
| Acmemfg |
Clutch kit from 2000 S3T. 8500 mile take off. Excellent condition. Only reason it is out of the bike is I had it apart and put a Barnett extra plate unit in. $30 plus shipping (which shouldn't be much) | ||
| Lake_bueller |
Here's a little something for your lady: NEVER BEEN WORN NWT Joe Rocket Pacifica leather jacket. Size Medium 1.1mm drum dyed leather Full sleeve removable liner Retailed new for $400 I paid $150 for it on closeout (non-refundable). I got it home and it didn't fit (sleeves are too short). I'd like to make back what I paid. I'll include shipping. | ||
| Loki |
Lake_B Did you get my email??? | ||
| Wyckedflesh |
For Sale: 6footx10foot enclosed box trailer. New purchased in Sept, '03. Financial difficulties forces sale. $2000obo wyckedflesh@hotmail.com located in Phoenix AZ. (ninja not included)  | ||
| S1lightning |
Lake, is it all black, or colored?? I have a next door nieghbor who is learning to ride, and I told her about your jacket, she wanted to know. Also, does the Pacifica have full padding or partial or none?? | ||
| Lake_bueller |
S1: it's all black. There is no padding. Here's a picture:  | ||
| Loki |
clearing out some space -97 stock 2" header from S1, normal blemishes and no dents (make offer) -carbon fiber "racewinder" cover for a forcewinder, no cracks or breaks - does need new well nuts put in it{vibration does funny things} (make offer) -stock rocker box covers(post xb conversion), normal wear and tear here -stock S1 and S1W handlebars (no anbormal bends) -"Daytona Boss" muffler may still be available, has the front strap and NOT the rear one. -two early showa shocks from S1 (make offer) - **warning** non buell but.... -H Gericke jacket sz44 (w/liner), "Kawasaki" superbike jacket -red/black/silver(matches the old GPz colors) with kawasaki on the front and rear. Just barely broken in and never touched the pavement. It has been stored for the past few years. Absolutely nothing wrong with this one, just put on a couple extra pounds and no more GPz in my stable. | ||
| Bluzm2 |
Loki, Is the Dayton a 2 1/2"? I may want to modify it to work on a race header for my S2. I have to check length/clearance first. Brad | ||
| Loki |
Bluz, It is | ||
| Davefl |
Loki, You have mail | ||
| Loki |
RaceWinder is gone to the man from florida | ||
| Davefl |
Loki Do you have Paypal? If not e-mail me your address and I can send you a money order. Shipping will be to Zip 33541 Thanks. | ||
| Jsunstar |
Borla exhaust for sale. selling for a friend who had it on a 2000 m2. (2.5" )...its carbon fiber wrapped and stainless steel inside and out. sounds sweet...like a lion growling! s'posed to be guaranteed for life...or a million mile warranty. he shaved the spring mount (its not neccessary) he made his own to drag race and this one goes out the door.•••• only got about 1000 miles on it... no repacking ever neccessary, they dont use it! anyuone interested, email jsunstar@yahoo.com 200.00 shipped to lower 48. thanks 'jason | ||
| Soundman |
Jason, I the borla exhaust including the header pipes or is just the can? I think the 2000 M2 is the same as a X-1, so it might fit my bike Thanks , Soundman....... | ||
| Koz5150 |
I just saw some WileyCo Exhausts on Ebay for X1's and M2's. Beware, they are are the older style, but still hold lifetime a gaurantee. I think they were gong right around $145 | ||
| Fuscat |
For Trade (preferable) or Sale (if needed) I have the aluminum breather blowby valve setup for sale. This is the billet piece that routes from the breather bolts on the heads of Tubers over the carburator top to a catch can or run off line. It is in good shape only a couple of blemishes one is on the front where it just barely rubbed the frame and the other is on the under side where it barely rubbed the carb top. Overall I would say its a 90% or better part. But it is a used piece. It fits the S1 and the M2 for sure, possibly others. Very nice piece, but I went to the XB rocker covers and no longer need it. I took it apart and cleaned it out and re-sealed it and put it back together. I would love to trade this straight up for the front sprocket guard I have been looking for ever for! Joker Machine makes one I think American Sport Bike has one and there are a couple others out there.. I would be open to other trades or cash offers as well. I have a 97 S1 Lightning. I was speaking with a guy who had the one by Joker Machine but I never had pics until now and I had a computer crash and lost his info. So if you see this, this is the piece I was talking about.. I'm in kansas city but I can ship it anywhere in the US atleast. Post here or email my home address at stftr@birch.net I will be out of town from 5/14 through 5/16 but I will respond promptly as soon as I can if anyone is interested.     |
