| Author | Message | ||
     Ready2ride |
Removed from an XR1200 with 1800 miles. Harley part numbers: 34 tooth sprocket/rotor assy. 30018-08 Primary chain, 94 links, 40057-08 Will fit '08 and newer XB12's (of course you will want to confirm this for yourself) Replace your stock 38 tooth gear and get better low speed control and improved acceleration. Engine braking is also improved. I will include the used bolt (part# 4589) if you want it, but it is a "one time use" part. A new bolt is the only thing you will have to buy to make the swap, unless you wish to replace the primary cover gaskets and o-rings. $80 shipped conUS   | ||
| 1324 |
Interested in selling just the rotor? | ||
| Xbrfirebolt |
I'm interested in the complete package. I need to verify it fits first. I forgot to add that's if 1324 doesn't take it first. I didn't mean for it to look like I was trying to jump in front of 1324. I'm sorry for that. PM sent to 1324 PM sent Plus I don't need the rotor if 1324 wants it. (Message edited by xbrfirebolt on April 21, 2010) (Message edited by xbrfirebolt on April 21, 2010) | ||
| Ready2ride |
"Interested in selling just the rotor?" I guess you mean the rotor without the sprocket? I'm not sure about the Buell application, but the sprocket and rotor are not available separately for the XR Sportster, hence the single part number. Yes, the pieces are bolted, but only after being pressed together as I understand it. I'm not interested in trying to separate them. | ||
| 1324 |
Yes, just the rotor w/o the sprocket. In the Buell system, you can order either (common modification is to replace just the sprocket). If you change your mind, let me know. I can use the rotor for a future project. Thanks. | ||
| 1324 |
^^ And yes, they are pressed together. Can also be pressed apart with basic hand/shop tools... | ||
| Ready2ride |
SOLD |
