Author |
Message |
1324
| Posted on Friday, April 09, 2010 - 10:31 am: |
|
New-ish pads with about 250 street miles on them. Selling because I replaced my pulsing rotor with a new one and wanted to start fresh with everything. Will they pulse on a good rotor? I don't know...your call. Make me an offer. |
Lovedabueller
| Posted on Saturday, April 10, 2010 - 01:26 pm: |
|
WAS YOUR ROTOR WARPED???? |
1324
| Posted on Saturday, April 10, 2010 - 09:37 pm: |
|
No warping. I ran the rotor with the ZTL1 setup with pulsation, so I upgraded to ZTL2 hoping these pads would eliminate the pulsation. It didn't, so I changed the rotor and installed new pads as a precaution. It is likely the pads were OK, but I don't have the time to keep messing with things. |
Rah7777777
| Posted on Saturday, April 10, 2010 - 10:50 pm: |
|
odds are the pads are A-okay. The rotating mass will cause the pulsation, not the pads. |
Skinstains
| Posted on Sunday, April 11, 2010 - 01:16 pm: |
|
Did you get my offer ? I PM'ed you. |
1324
| Posted on Monday, April 12, 2010 - 08:23 pm: |
|
Sorry guys, pad are sold. Thanks for the interest. |
|