| Author | Message | ||
     Blastofrage |
Color: Black Model Year:2002 Make:Buell Model:Blast Condition: Non-Ridable Mileage:6xxx Location:Missouri Price:$2000 neg I currently have a blast for sale.it is black with new exhaust,carb jets,i deleted the air box,rear fender,and changed the bars to a sport bike type of bar,this bike is a great bike motor runs beautifully but i recently had a rear wheel bearing break and wallow out the hub so the new bearings i purchased dont fit right have been talking to some people bout fixing it but not comfortable with that i would rather put a new wheel on it.it hurts to sell this bike cause it was my first bike and has been extremely generous to me i currently bought an 1125R and little momma(BOSS) said i have to sell it so my loss is your gain.if anyone is interested you can contact me through email me@ jerrymccollum@rocketmail.com or phone (816)612-3286 or reply to post. (Message edited by blastofrage on November 05, 2009) | ||
| Black51 |
Hi Jerry. Before you throw the baby out with the bath water...my rear bearing went out as well (very common problem as the bearings were Chinese-made and there may have been a recall on them). I took the tire off in about 5 minutes, took it to Yamaha dealer (H-D charges waaaayyy too much!) and they pressed new bearings in for me in about 10 minutes while I waited. And the whole deal only cost me $20, which included the bearings and their labor. Great deal! | ||
| Blastofrage |
no see my problem is that the old bearing made the bearing slot bigger i have new bearings already but drive side has a bit too much play so i will have to take to a machine shop and machine out the hub and find a bigger bearing to fit axle or buy new wheel which no biggie but BOSS lady(wife)says got new bike time to sell old one | ||
| Froggy |
Yes your best bet is to buy another wheel, they pop up all the time on ebay cheap. |
