| Author | Message | ||
     Bjack |
I'm looking for a front left turn signal unit for my 1995 S2. Thanks in advance. BJack | ||
| F_skinner |
Bjack, in case no one else has what you need I have two rear ones. Both damaged but work. The wiring is different from the front because they attach to a screw and nut in the rear fairing. I just picked up a left front from a Buell dealer a few weeks ago. Try a couple of the sponsors or have someone that works at a dealer (Ratbuell or Zac) see where in the US someone might have one. Frank | ||
| Bjack |
Thanks Frank. I'll let you know if I have trouble coming up with one. Bruce | ||
| Ratbuell |
I do know they're still available new because I bought myself one about a year and a half ago. I want to say we might have some on the shelf at work, but it's well past beer o'clock and I've been home for a while  Send me a note as a reminder, to jgoetz@hdoffrederick.com, and I'll check stock/availability tomorrow AM. | ||
| Ratbuell |
Wow. I actually remembered something on my own, LOL. Y0503.8, $12.25/each, I show 2 in stock. www.buelloffrederick.com has an online order form, or you can email me at the addy listed above  | ||
| S2pengy |
Double check it but I believe the stem lenght is different front to rear... | ||
| Ratbuell |
Part lookup shows 2 part numbers for the 4 signals. One number is LF/RR; the other number is RF/LR. I have to look at my S2 to be sure...but I think since they're "pre-mass-production", they have the same length stud. The later bikes, with the spacer on the front signals and not on the rears, have different length studs (X1, M2, S1, and XB). | ||
| F_skinner |
The front and rear are the same save the connectors and color of the wires. All of the ones I have seen from a dealer (only a couple) are the same and none of them are wired up for the rear. You will have to modify one wire to attach to the relay stud. | ||
| Bartimus |
Bjack, I've got one front turn signal for an S2. If you want it, you can have it for the cost of shipping it to ya. | ||
| Bjack |
Thanks to everyone for your responses. Bart, thanks for the generous offer, but since Joe has one in stock I'll pick it up from him and you can save yours for the next guy who's not lucky enough to find one in stock. Joe, I'll go online and place the order. I also need some parts for a stock S2 muffler which I'll order at the same time. Thanks again. Bruce | ||
| Ratbuell |
Bruce - got the part request for the turn signal, but nothing about muffler parts. System error, or did you find what you need? Printed out your part request and will hand to Special Ed in parts momentarily | ||
| Bjack |
Joe, I still need the muffler parts, I was just too lazy last night to go find my parts list to get the numbers! I need all of the hardware for the rear bracket of the muffler. I have my part list now and will fill out a new parts request. Let me know if you get it tomorrow. Thanks, Bruce |
