G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Revz Posted on Friday, May 29, 2009 - 02:10 pm:        I got these today, I have an S3 so don't know what model years they will fit. Quite frankly I don't know anything about these parts, but will look for parts #, if you want... The pieces have a few scratches (mostly surface, but one or two would need some repair) here and there, but as far as I could tell no cracks, or missing tabs. There is no attachment hardware. Make an offer, I will add fair shipping cost. One exception...if someone has an S3 front fairing to trade (fits 97 S3) that will trump all other deals.... If you are interested in a certain piece I will take more pictures to show more detail   Tdman77 Posted on Friday, May 29, 2009 - 06:23 pm:        I'm interested in the undertail. Please send me pics of the undertail to tdman77@hotmail.com Dibs, depending on the pics.   Brinnutz Posted on Saturday, May 30, 2009 - 12:16 am:        Do you have the mounting hardware for the chin fairing at all??   Revz Posted on Saturday, May 30, 2009 - 10:42 am:        Sorry no hardware... And in full disclosure if you look at the bottom part of the tank picture, one of the rubber insert grommets is missing, the mounting tabs are not damaged in any way. Thanks for looking Larry   Pkforbes87 Posted on Saturday, May 30, 2009 - 11:38 am:        I'm not looking to buy, but could you post detailed pics of the undertail? If it's the American Sport Bike piece it is of amazing quality, but if it's an eBay knockoff like the one on my bike then it leaves something to be desired It can still work, but requires rigging up some mounts for the forward edge of the piece, and some type of seal around the edge to keep dust out of the trunk.   Scarecrow Posted on Saturday, May 30, 2009 - 11:54 am:        Having had both undertail pieces I would be willing to bet that it's a knockoff. Judging from the fact that it is lying flat this means there is no mounting bracket on the backside of the deepest part of the wheel well. This means it's either broken off or the piece is not from American Sport Bike. Either way it is more difficult (but not impossible) to mount without that bracket.   Tdman77 Posted on Saturday, May 30, 2009 - 01:49 pm:        Revz - I'm going to pass on the under tail. Scarecrow - You are right it's the knock-off with out the support bracket on the front.   Revz Posted on Saturday, May 30, 2009 - 07:52 pm:        Tdman77 No problem thanks for looking... Pkforbes87 here's the pic of the back I hope this helps   Revz Posted on Saturday, May 30, 2009 - 08:02 pm:        More pics... Thanks for noting that it is not an original manf. piece. Though I'm new to the site, I have had very good luck buying things already on this site for the S3 and the last thing I want to do is misrepresent something. Larry   King_of_kali Posted on Wednesday, June 03, 2009 - 09:10 pm:        how much for the chin fairing?   Harold Posted on Wednesday, June 03, 2009 - 09:28 pm:        Is the undertail the hugger rear fender?   Revz Posted on Thursday, June 04, 2009 - 09:48 am:        King of kali I haven't the slightest what it is worth, make an offer and I'll add postage and send it off... Harold As noted above, I really don't know anything about these parts. It has been brought to my attention that this particular that the underseat is some sort of aftermarket copy of some other other manf. Thanks for looking... Larry   Revz Posted on Thursday, June 04, 2009 - 09:51 am:        As an additional note, I'm not looking to get rich here, just to get these parts out of my garage so...if you want any of them, buy me the equivalent of a cup of joe and some donuts, pay for the shipping and they're yours... Larry   Andymnelson Posted on Thursday, June 04, 2009 - 11:41 am:        PM sent Larry   Harold Posted on Thursday, June 04, 2009 - 07:47 pm:        PM sent Larry   Whatsabuell Posted on Friday, June 05, 2009 - 11:56 pm:        whats sold so far? I'm interested in the bodywork, don't need the undertail   Revz Posted on Saturday, June 06, 2009 - 07:21 am:        Sorry for the delay in answering...my daughter graduated from High School. I will sort through the e-mails and post updates and/or respond later today (Sat.) thanks Larry   Andymnelson Posted on Tuesday, June 09, 2009 - 11:37 am:        Hi Larry- Just checking in- What's the status of the parts? I believe that I was first to PM/post...but haven't heard from you. Thanks   Revz Posted on Friday, June 12, 2009 - 09:59 am:        Andy Just PM'd you. Looking for shipping options which aren't out of this world in $$$....The size of the fuel tank cover seems to be a challenge, weight certainly is not... Larry   Andymnelson Posted on Friday, June 12, 2009 - 10:13 am:        No problem, I PMd you back   Revz Posted on Friday, June 12, 2009 - 10:36 am:        Andy I took the pieces to FEDEX and got a reasonable quote, check your e-mail... Larry   Revz Posted on Friday, June 12, 2009 - 11:50 am:        All but the undertail sold I will be contacting next in line for undertail today... Larry   Revz Posted on Saturday, June 13, 2009 - 11:30 am:        Everything sold... Everything shipped... Thanks for looking Larry

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: