| Author | Message | ||
     Fierrosc |
This is the original artic white plastics off my XB12STT that I painted at home. They will fit any XB12S models. The plastic are in like new shape, only about 1,100 miles on them, without any cracks or scratches. Use them as is, paint them yourself or have a professional paint them for you.  (Message edited by fierrosc on June 03, 2009) (Message edited by fierrosc on June 03, 2009) | ||
| Cyclescoot |
I'm looking for the front fender if you end up separating. I'm in NC if you are close, judging by the US129 sticker. Let me know, Staton | ||
| Fierrosc |
I posted a separate one for the fender. | ||
| Kickboxin |
do you have higher resolution pics of the finish? | ||
| Fierrosc |
Yes, I had to downsize them for the post, again the paint is nothing special, I did it myself at home with spray paint from Home Depot. You can see where it's chipped around the screw holes where the paint stuck to the screw/washers. Send me a PM with your e-mail address and I'll send you more pictures. | ||
| Arksz |
Since this is of a stt would it fit a regular xb12s? | ||
| Fierrosc |
They are ALL the same, XB12S, XB12SS, XB12SCG, XB12STT, and XB12R. Go to the buell website to get a pdf file with a list of all the plastic part numbers... http://www.buell.com/en_us/gear/accessories/product.asp?Menu_ID=2&ProductLineID=3&CategoryID=5&ProductID=4274 (Message edited by fierrosc on May 30, 2009) | ||
| Fierrosc |
Bump | ||
| Jrobm2 |
I need to get an xb to go with that paint! Like the look. | ||
| Fierrosc |
This was one of the first things I did (121 miles)...  ...eventually looked like this...  ...then I sold it and got one of these...  ...matches the Stang better. |
