G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xenox Posted on Tuesday, May 12, 2009 - 03:35 pm:        I have quite a few left over exhaust servo motor eliminators. These plug in where the servo motor used to, while not exactly fragile care should be taken to install and remove, all have been test fitted. This design works nicely,and is made with quality components and soldering .You'll need to water proof the connector with a plastic bag or a balloon. This little circuit could not of been possible without Optos' BW contribution. I'll include simple installation/removal instructions via e-mail. PM me if you are interested or have more questions. $12.75 total each ( discount shipping for multiples) to your door in the connected states. Thanks for looking! (Message edited by Xenox on May 13, 2009)   Prowler Posted on Wednesday, May 13, 2009 - 07:15 am:        PM sent   Ry329 Posted on Wednesday, May 13, 2009 - 10:14 am:        PM sent ..   Xenox Posted on Wednesday, May 13, 2009 - 11:45 am:        PMs replied to.   Billyo Posted on Wednesday, May 13, 2009 - 08:59 pm:        What purpose does the eliminator serve? I'm running without the inner airbox with grills in the outer cover so the servo is gone and the connector is open. By the way, does the header wrap (from your profile photo) help with heat? Since I put my RSS on the fan rarely runs but my left leg gets pretty hot.   Xenox Posted on Wednesday, May 13, 2009 - 09:35 pm:        It keeps the CEL off if you have a XB12 with a stock ECM. Sent you a PM! Thanks!   Lousirider Posted on Thursday, May 14, 2009 - 10:34 am:        It keeps the CEL off if you have a XB12 with a stock ECM. Just curious what you mean by CEL. PM sent. THANKS   Xenox Posted on Thursday, May 14, 2009 - 10:59 am:        Thanks for posting in this thread Louisrider! This may help others as well. By CEL I mean "check engine light" Normally if we switch to an after market muffler on XB12 models we no longer have use for the interactive exhaust servo motor. If we remove it we need to substitute a device that lets the {ECM)think that nothing has changed. Or else the CEL comes on. This circuit accomplishes that. Thanks again.   Sleez Posted on Thursday, May 14, 2009 - 11:20 am:        has this been proven to work on the 08s as well?   Xenox Posted on Thursday, May 14, 2009 - 12:14 pm:        I don't know at this time. DDFI III? I'm curious about this as well. Other similar devices claim to work on all XB12 models. If they do, this should as well. Wish I could be of more help. Thanks!   Xenox Posted on Thursday, May 14, 2009 - 01:09 pm:        Circuit orientation detail, sub harness routing:   Xenox Posted on Wednesday, May 20, 2009 - 02:11 pm:        I still have a few left, they work like a charm !   Xenox Posted on Monday, June 01, 2009 - 09:43 pm:        Sleez and all other interested. These will work for model years '04 - '08 12R,S,X, models.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: