G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Georgedombeck Posted on Thursday, April 16, 2009 - 06:12 pm:        I need the linkage from the shifter to and including the shifter arm that bolts to the shift shaft. Also need linkage for brake pedal. Have s2 bars to trade. thanks, george   Georgedombeck Posted on Thursday, April 16, 2009 - 06:33 pm:        for a tuber   Smoke Posted on Thursday, April 16, 2009 - 06:37 pm:        low s2 bars or tall? tim   Smoke Posted on Thursday, April 16, 2009 - 06:40 pm:        just saw your other ad and they look like the low ones that i want. i will check for the linkages. i should have them for a s1 and w. (at least i took 2 sets off for crossroads install) tim   Georgedombeck Posted on Thursday, April 16, 2009 - 07:41 pm:        What I am holding is what I need linkages for. Those other pegs are welded on. I want mine lower. george   Georgedombeck Posted on Thursday, April 16, 2009 - 07:42 pm:        I need the arm that goes onto the shift shaft too. thanks, george   Georgedombeck Posted on Thursday, April 16, 2009 - 07:43 pm:        also, how not to mount a shifter pivot. A block of aluminum was welded to the engine case.   Easy_rider Posted on Thursday, April 16, 2009 - 11:04 pm:        I took a look at what I have, and it's the same piece you have!!?? Does the chopper crowd reuse the rest of the linkage? There's a swap meet in town this weekend. Don't know if there'll be any Buell items or not, but I'll keep a look out.   Georgedombeck Posted on Thursday, April 16, 2009 - 11:10 pm:        crap. I found one on ebay, its a from a s1 and its titainium. $150. g   Smoke Posted on Friday, April 17, 2009 - 06:34 am:        the crossroads installation uses the long attachment shaft you are looking for, but i have the shifter arm that mounts on the shaft coming out of the primary. i will look in my other stuff for one. are you going to cut off the welded peg mounts and shifter pivot block? tim   Georgedombeck Posted on Friday, April 17, 2009 - 11:00 am:        Yes cutting off all that stuff and putting on the stock pegs. I just bought a titainium shifter and brake set off ebay for $142 shipped. So I am all set. Thanks for the help. george   Georgedombeck Posted on Friday, April 17, 2009 - 12:37 pm:        what a tool. I just paid for an auction on ebay for the ti. shifter and brake set. I get an email from the seller telling me he just arrived in Holland and wont be able to ship the parts until May 4th. I told him I wasnt happy and why would you run auctions if you knew you were going to be out of town? g   Guell Posted on Friday, April 17, 2009 - 10:39 pm:        George, i have the shifter linkages and arm that slides onto the shift shaft, pm me if your interested

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: