Author |
Message |
Tim33625
| Posted on Friday, April 10, 2009 - 08:08 pm: |
|
Officially retiring from racing. For Sale: Regional Multi-Championship winning Buell XB12 Racebike / Trailer / Spares etc. This bike is fully prepped and ready to race. The engine is fresh with one race weekend on it (2 sprint races + practice). Very Quick and Very Reliable! Custom Race ECM mapping was performed in the Buell Factory Racing dept (in East Troy, WI) by Glen Veatch. It is tuned (mapping/ignition) to meet the HP/Weight requirements for the Moto GT at >95HP/390 lbs., but unrestricted on race gas it makes 98-100HP on the dyno. Great if you want to run regional sprint classes. This same configuration with cams and higher comp pistons has made 118HP reliably in the past. Ran full season with no issues other that replacing an oil line. I have the Buell software and maps for tunning the Race ECM I am willing to separate bike / trailer / spares as a group, and will accept reasonable offers. By "group" I mean (ie: 1.)complete bike with spares kit, 2.)Spare frame with Triples, forks, wheels and wire harness or, 3.)Trailer or a combination of these etc.) I'm not interested in sending a set of oil lines or a generator to Oregon or Wisconsin or wherever. View more pictures and details here:http://www.racemmg.com/buellracebike.htm You can contact me anytime at: tim@s3media.net Motor: Freshly built AMA/Moto GT2 (Formerly GST) legal. (Built for Endurance racing and can be easily tuned for sprints) Custom Race ECM mapping was performed in the Buell Factory Racing dept (in East Troy, WI) by Glen Veatch. Race Equipment: Fully prepped Buell XB race bike (2) stands front (2) stands rear (3) sets of wheels (2) rain tires front (1) rain tire rear Assorted DOT & Slick scrubs Tire warmers Custom Beson exhaust Adjustable cam timing Factory Race ECU with software (Tuned at Buell Factory Racing Dept.) Vortex sprockets complete (39-47 rear) Plus Daytona specific gearing X-ring chain SS Brake Lines EBC pads Buell full race body Penske Triple adjust Rear Kit fork internals prepared by GMD Computrack Custom "Hal's" rear swing arm (braced / reinforced) Spares: *** Since this was an endurance team we have essentially enough spares to complete a second bike less the motor and swing-arm*** Complete race only frame purchased from Buell Racing Factory Sub frame Fairing Stay Complete wire harness Spare forks brakes clutch cables (clutch and throttle) (2) sets of complete oil lines rear sets clip on bars chains axle wind screen grips engine case covers Buell specific tools Pit Area Equipment: Rolling Tire/wheel Tree (holds up to 12 wheels) Impact wrench (2) 10X10 Easy-Up tents (2) folding tables (3) folding chairs (3) extra large stackable storage bins Trailer: AOK 16ft Dual axle trailer with ramp door Custom installed work bench with cabinets Overhead storage cabinets Tire/equipment shelf 2600 Generator Electrical cables For Racing Only: Frames are Buell Factory Race-Only frames. This bike was built from the frame up specifically for racing and there is no street equipment included. Also selling set of leathers (fits 6' to 6'4" 190-225lbs.) I'm 6'2" 185 and they fit loosely. Make offer.
(Message edited by tim33625 on April 10, 2009) |
Buellsrule
| Posted on Saturday, April 11, 2009 - 08:59 pm: |
|
How much? |
Tim33625
| Posted on Sunday, April 12, 2009 - 10:37 am: |
|
I'm asking $8500 OBO for everything. Taking offers if someone wants just the bike, spares, trailer or individual components etc. Also forgot to mention, I have a 2002 Yamaha zuma pitbike painted black to match for $500 Thanks. |
Vortec57
| Posted on Sunday, April 12, 2009 - 11:10 am: |
|
Sweet dea. Too bad you're so far away or I's snag the Zuma. |
Buellsrule
| Posted on Sunday, April 12, 2009 - 12:10 pm: |
|
Does the bike have a VIN? Thanks, Frank. |
Paint_shaker
| Posted on Sunday, April 12, 2009 - 05:15 pm: |
|
Somebody's gonna get a Smoking deal!!!!!!!!! If I didn't already have a race bike, I'd be driving the 2 hrs to make the deal! |
Brinnutz
| Posted on Sunday, April 12, 2009 - 10:24 pm: |
|
BTW, I call already PM'ed about the leathers a day or so ago before any posts in here, so dibs on those.. =) |
Tim33625
| Posted on Monday, April 13, 2009 - 05:26 am: |
|
Brinnutz, just PM'd you on these. |
Zxmarc
| Posted on Monday, April 13, 2009 - 07:39 am: |
|
email sent |
Brinnutz
| Posted on Monday, April 13, 2009 - 07:49 am: |
|
Consider the leathers sold. I'm gonna buy them, even though I don't have a bike that's running at the moment...I will. =) |
Tim33625
| Posted on Monday, April 13, 2009 - 06:04 pm: |
|
Just got a deposit on the whole package including Pit bike... I appreciate everyone's interest. Brinnutz , the leathers are yours. |
Zxmarc
| Posted on Thursday, April 16, 2009 - 07:44 am: |
|
pm'd you |
Buellroadracer
| Posted on Wednesday, April 29, 2009 - 07:03 pm: |
|
still for sale? looking for spares as well. Jaycent Gebers #5 Old Glory Buell AMA PRO Moto-GT |
Buellsruell
| Posted on Friday, May 01, 2009 - 08:33 am: |
|
$8500 "OBO"?? Wow!! KILLER DEAL |
Fullmoonracing
| Posted on Tuesday, May 26, 2009 - 06:33 pm: |
|
I emailed you with a few questions about your bike. Call me when you can. My number is in the email. thanks, Matt |
|