| Author | Message | ||
     Twodogs |
JAZZMAN, I have a complete crank assy sittin here taking up space. Has a loose rod but no damage. In box ready to ship. Took it out of my S3 last winter.(see profile) Lemme know , oh yeah you got mail too. Dog  | ||
| Twodogs |
set of P/M wheels for tubers. New bearings. Hubs and bolt holes all perfect. I put them on EBAY item #2456108463.Take a look at the junky old things if interested. DOG | ||
| Bud_man |
Hey Twodogs. What reserve have you got on the PM wheels? Thanks. - Bud | ||
| Court |
Bud: Bid and find out, I did. Court (the high bidder) | ||
| Jst |
Tsk, Tsk negative feedback.  Twodogs I'd keep an on him. | ||
| Acmemfg |
Custom seat for a 1999-2002 S3. Perfect condition. $159 plus shipping | ||
| Lake_bueller |
1) Frame/1998/S3T/Titanium Gray/$350 OBO + shipping 2) Dennis Fenrick/Green Bay, WI/ awinefan@hotmail.com 3) Clean title 4) Pictures to follow (I need to figure out that opitmizer stuff) 5) There is a small area (about the size of a silver dollar) on the right upper tube that has been touched up with some bad matching paint. There is also a small scuff area from a heat shield that was installed by previous owner. I can have this frame stripped and new powder coated in your choice of a standard color for approx. an extra $200. Shipping is approx. $75-100. I've found out the hard way that you can't box this item for shipping. It will be wrapped in bubble wrap and tape. | ||
| Jst |
Lake, From past experience you can ship boxed frames via Fed Ex. It's close but it can be done. Almost anywhere in the continental US for under $50.00. | ||
| Cliffb |
Urethane muffler mount bushing from American Sport Bike. I bought this bushing in anticipation of mounting a stock muffler. Turns out it's for the old style mount and I don't need it. Cost me about $30 with shipping. I'll sell it for $15, shipped. email cliff462@charter.net | ||
| Ralph |
For sale, totally custom - only one in the world - aluminum body for Buells. This was made specifically for an S3, but will drop right on to an M2 (same frame) or with very little modification an X1. It would certainly be possible to attatch to an S1, you would just have to weld a fairing mount to the frame, which all the others have from the factory. The body is 95% finished. It needs to be trimmed for foot controls and one part of the bracketry needs to be attatched to the front mount. The frame the fairing is attatched to is 4140 tube, which weighs about three pounds total. The fairing is made of aircraft aluminum and is very light. Feel free to let me know if you have any questions or want other photos. Price is a piddly $450 and I will take care of shipping in the US. bighairyralph  | ||
| Fast1 |
I have a crank from a 1997 S1 sitting around. Ping me at 256-466-8657 | ||
| Seeeu911 |
Vanson Traveler Sport Pants solid leather black. XLarge: 36 to 40 with 32 inseam Model #PTTS Competition weight drum-died top grade cowhide (an average of 1.5 mm thick) Waist adjustment (about 3" from smallest to biggest) Double thick leather at the knees Zips to compatible jackets Two Cordura lined front pockets and one snap-close wallet pocket Expansion sections above knee for comfort Vanson body armor compatible (hips and knees) Tapered leg with zipper to fit inside riding boots or over lacers Athletic mesh lining see picture of it here. I bought here 2 yrs ago. http://newenough.com/vanson_traveler_solid_pants_page.htm Condition: Like new. Only worn 2 times. Too heavy for fla weather. zipper on left leg needs replacement. It will zip close but then open in the middle. While wearing boots zipper stays closed at the bottom and is not noticable. (wear as it is or $45 to vanson to replace. IMHO factory bad zipper, but out of 1 year warranty when I noticed it.) The leather is perfect looking no creases or folds and 100% no scratches or tears or scuffs.Looks 100% new. $200.00 seeeu911@hotmail.com | ||
| Len |
2001 M2 Low parts, Forks, Shock, Seat, trade for standard parts. All parts have 4900 miles on them. | ||
| V2win |
911, You have mail. I want them. | ||
| M2fortom |
4 gal. fuel tank from a 98 M2 in black. White decals are in great shape. A few nicks in the paint and a small gouge that was poorly repaired are all thats wrong with it. I would give it a 7.5/10. See photos here: http://www.badweatherbikers.com/cgibin/discus/show.cgi?tpc=21&post=167148#POST16 7148 $60 obo plus shipping (est. $15-$20) e-mail: batesthomas@aasd.k12.wi.us | ||
| Seeeu911 |
Tha Vanson gear has been sold. Thanks ! | ||
| Kent_c |
 I still have alot of good '99 Cyclone M2 parts . They moved my ad into the archives,check it out! I can't believe nobody needs these parts.Also, I need a front end (complete) to fit a '99 Cyclone M2. somebody give me a hit and lets do a deal!! | ||
| Kent_c |
Still have a lot of parts for a '99 Cyclone M2. My ad got archived 1/24,check it out! I can't believe nobody needs these parts.They're all in great shape,and i'm ready to deal. Also I need a front end (complete) for a '99 Cyclone, maybe a trade!! Somebody give me a holler \clipart@ cwild bunch5@aol.com{alarmclock} | ||
| Cooper |
for sale race kit exhaust pipe p/n 65396-96ya fits 96-98s1, 98s1w, 97-98m2, 97-98 s3&s3t never used still in box 300.00$ or best offer e mail candrews11@cflrr.com phone 407 977 9703 | ||
| Lowlife |
Sandy you have mail. |
