Author |
Message |
Dtmcnamara
| Posted on Wednesday, September 24, 2008 - 10:18 pm: |
|
Ok guys so I have had what now, 3 buyers flake out of purchasing my engine. I am going to put it back up here for sale before I put it back on ebay. Here is all the information... What I have here is a 2000 Buell Lightning X1 engine that I had built for my bike. I recently ran into some trouble and need to sell it. The motor has the following things done: Revolution Performance Big Bore Kit (1250cc) All New Harley Seals and Gaskets XL1200 Heads XB12R Rocker Covers and Breathers Updater Y-Exhaust Bracket Updated Shifter Nology Wires New Oil Pump Custom Ground/Hardened Cams (Race Stage 2) Forcewinder Intake NRHS Billet Front Motor Mount Race ECM New Speed Sensor New Clutch Cable The engine will come with the 4 bolts to hook it up to the swing arm, all the wires to get the engine running, the Buell race ECM, and stock ignition. This is a direct plug and play motor. The engine has 7,209 miles on it, the engine broke two head studs around 5,000 miles and that is what made me decide to build it. All parts were new when I bought them and thus has around 2,209 miles on them. I included a dyno graph also, i ran the bike a few days ago just to show how strong the engine is. It really needs a professional tune, but the race ecm works fine for now. There is also two videos just to show the motor runs, the first video is of the bike starting up. The second video is after it warmed up, i give it a few revs just to show the bike runs fine. The bike has a small leak around the starter, i just never got to resolving it. I use to have to add a 1/4 a quart every few months, so its nothing bad, small easy fix while the motor is out. If you have any further question feel free to ask. THANKS Looking for $3500 shipped OBO. THANKS David McNamara 404-725-4979 |
Dtmcnamara
| Posted on Thursday, September 25, 2008 - 06:51 am: |
|
i have had a few emails about why my price is so high and this is why: $ 82 Nology Wires $819 1250 cc Big Bore Kit $ 88 Updated Exhaust Y Bracket $140 Updated shifter $146 New Oil Pump $102 Gasket/Seals Kit $626 XB Heads $ 97 Rocker Covers $380 Cams $196 Forcewinder Intake $287 Heads with New Valves and Installation $244 Front Motor Mount $200 Race ECM $3407 TOTAL Plus the install of everything was right at $1700. $5107 TOTAL with Install Then the initial cost of the engine and cleaning and everything else. Just figured I would post this up just to show that I am not just pulling a $3500 price out of my ass. THANKS and feel free to contact me with any further questions. THANKS |
Dtmcnamara
| Posted on Friday, September 26, 2008 - 04:29 pm: |
|
anyone interested at all? |
Dtmcnamara
| Posted on Sunday, September 28, 2008 - 09:22 pm: |
|
ttt |
Brinnutz
| Posted on Sunday, September 28, 2008 - 09:28 pm: |
|
Nice motor... |
Chasespeed
| Posted on Sunday, September 28, 2008 - 10:19 pm: |
|
Dave, Good luck, if I had the funds... this would be perfect for my next project... Chase |
Dtmcnamara
| Posted on Monday, September 29, 2008 - 12:35 am: |
|
thanks...the buell finally was done for. I had too much money in it and then one day a bill for school came in and I saw the interest rate...36.99% I said F'that and I had to start to sell the bike. Lucky for me I got enough money together to pay tuition off before the first payment and interest period, but now I need to pay some other bills off before I get another bile. Looking into another x1 or s1, we will see when the time is right Until then, the money from this will go to the bank and pay the remainder of the Gixxer 1000 off. |
Froggy
| Posted on Monday, September 29, 2008 - 12:53 am: |
|
Damn, there is a X1 in the for sale section that has a blown motor, I need to run out and rob a bank! |
Dtmcnamara
| Posted on Monday, September 29, 2008 - 06:53 am: |
|
do it...money is money...as long as they are small unmarked bills.... |
Dtmcnamara
| Posted on Wednesday, October 01, 2008 - 05:22 pm: |
|
ttt. all reasonable offers will be considered |
Wile_ecoyote
| Posted on Thursday, October 02, 2008 - 03:32 pm: |
|
My ex-wife, take her! LOL PM me if interested in maybe taking payments. |
Dtmcnamara
| Posted on Tuesday, October 21, 2008 - 05:58 pm: |
|
ttt |
Dtmcnamara
| Posted on Friday, October 24, 2008 - 07:00 am: |
|
ttt |
Dtmcnamara
| Posted on Saturday, October 25, 2008 - 12:09 pm: |
|
Anyone know anywhere else I can put this engine up for sale? I have had it on eBay 3 times and every time the buyer flakes on me? Any other suggestions? |
Jramsey
| Posted on Saturday, October 25, 2008 - 01:37 pm: |
|
How about putting it back in the X1 frame and selling it as a complete bike. I've found unless you happen across the "right buyer" mods and new parts don't add to the value. |
Dtmcnamara
| Posted on Saturday, October 25, 2008 - 01:39 pm: |
|
entire bike is gone...this is the only thing I have left minus the battery... |
Dtmcnamara
| Posted on Thursday, October 30, 2008 - 05:56 pm: |
|
ttt |
Dtmcnamara
| Posted on Sunday, November 02, 2008 - 08:41 pm: |
|
ttt |
Dtmcnamara
| Posted on Thursday, November 06, 2008 - 06:28 am: |
|
PRICE DROP $3000 SHIPPED OBO}} |
|