| Author | Message | ||
     Hughlysses |
Buell race ECM, P/N Z1037.K, fits 99-up X-1 or S3/S3T. Cost $250 new; asking $200. Link to Buell webpage: http://www.buell.com/en_us/gear/accessories/produc t.asp?Menu_ID=2&ProductLineID=6&CategoryID=1&Produ ctID=3177 Drummer exhaust for tube frame Buell, 2-1/2" inlet, fits tubers with standard (NOT race) exhaust. Used for ~1000 miles. Cost $350 new; asking $300. Same great sound and performance as the better-known Drummers for XB's. Factory standard seat for Buell S3/S3T, late model (~1999-2002) "wide front" style, perfect condition. Does not include center latching pin. $100 SOLD gear shift lever, 2001/2002 style, new, never installed (this is shifter lever only, not complete kit)- $30 SOLD Cyclelift centerstand for tube frame Buell (no longer made)- $75 SOLD LARGE tankbag, Motopak GTX-20 nice bag, expandable, several compartments. Nice fit on S3 tank. $40 More info here: http://www.motopakluggage.com/gtx20.html Prefer payment by PayPal, all items plus shipping. PM for details. (Message edited by Hughlysses on August 28, 2008) | ||
| Guell |
hugh, the gear shift lever, is it everything i would need to install it on my 97? Or am i going to need more pieces? Ive got dibs on it! | ||
| Brinnutz |
dibs on stand | ||
| Hughlysses |
Matt, no, it's just the shifter lever. You can get a refit kit for ~$100 (I think it's still available) which includes the shifter lever, a pivot bolt that replaces one of the primary bolts, a short linkage piece, and a stubby piece that clamps on the shifter shaft where it comes out of the primary. I ordered it by mistake a few years back when I need another part of the shifter. | ||
| Brinnutz |
Hugh, can I see a pic of stand..I wanted to call dibs so no one snatched it..I posted from my phone... Does it lift both front and rear off the ground or just rear? Thanks!!! Hell, I'll probably take the tank bag. How does it attach under the seat, wrap around the frame or does it have a grommet for the gas tank bolt? | ||
| Hughlysses |
Wilson, here's a crappy enlarged photo from the old version of Cyclelift's website at the internet archive:  It supports the bike under the rider's footpegs and lifts the rear wheel. You can place a bottle jack under the front eye on the rear shock to lift the front. The combination works well. The tank bag has a strap that installs under the tank bolt at the rear. There's no grommet (I melted the hole with a hot piece of steel) but it's held up well. I only used it on a couple of trips. | ||
| Buellsrule |
I'll take the lift if no one else comes through. BR. | ||
| Easy_rider |
Wilson, The stand I use (looks to be the same) lifts the back. A bottle jack can lift the front to remove a front wheel. At the same time, there are some dangers..... Gimme a yell if you're concerned | ||
| Brinnutz |
Stand and tank bag shall be mine.. Hugh, I pm'ed you earlier, looks like you answered here... I'll pm again. | ||
| Brinnutz |
Hugh, let me know your paypal addy and I'll get you the cash. | ||
| Brinnutz |
Hugh, let me know your paypal address and I'll get you the cash. | ||
| Hughlysses |
Centerstand and tankbag sold pending payment. | ||
| Brinnutz |
Payment sent for stand and tankbag! Thanks! | ||
| Yo_barry |
I'll take the gearshift lever if still available. Send me your paypal address. yo_barry@yahoo.com | ||
| Hughlysses |
Barry- Gearshift available- PM sent. | ||
| Hughlysses |
Gearshift sold to Yo_barry. | ||
| Hughlysses |
Race ECM, Drummer, and S3 seat still available. | ||
| Ratbuell |
Curious about the tuber drummer - does the inlet face forward, or to the side? I have a 2.5" stock header on my S1W but it needs a side muffler inlet...also, do you have a pic? Curious if it's black, or stainless like the OEM S1W muffler. Thanks  | ||
| Hughlysses |
Ratbuell- The inlet faces to the side. It's black; it was converted from a stock M2/S3T muffler. Here's a few photos:     | ||
| Ratbuell |
Hmm...now to figure out if my currently-fixed income allows for such a purchase, for a bike that I can't ride for, say, another three or four months...  Thanks for the pics, I'm seriously interested. Gonna have to crunch some numbers... | ||
| Hughlysses |
Race ECM, Drummer, and S3 seat still available.... | ||
| Hughlysses |
Race ECM on "layaway" until Friday. Drummer and S3 seat still available. | ||
| Tommytubetone |
Open to a reasonable offer on the Drummer? | ||
| Jayvee |
I'll take the Drummer, PM sent. | ||
| Hughlysses |
Drummer sold. ECM on hold. S3 seat still available. (Message edited by hughlysses on September 29, 2008) | ||
| Mmmi_grad |
when was ecm bought? Im interested | ||
| Hughlysses |
Mike- Sorry for the late response. ECM was bought new around ~July 2006 IIRC. It's one of the "new" ones that was re-introduced by Buell. ECM is still on layaway for a while longer. I'll let you know if buyer backs out. | ||
| Hughlysses |
ECM and seat are still available. |
