G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Creature_x1 Posted on Thursday, August 21, 2008 - 12:16 am:        I'm kinda fishing here. There was a boo-boo with my motor rebuild. I will have a set of STOCK CYLINDERS BORED AND HONED TO MATCH 3.563" HURRICANE PISTONS. These are off a 2000 X1 with 16k miles before the bore. These are NOT NRHS cylinders. I got wrong sized pistons (communication error - nobody's fault) and the shop rebuilding the motor cut to fit. While I was talking to the guys at the shop we figured out what happened. So is anyone interested in stock cylinders bored .060 over? This is the same size as a 1250 kit. The drawback is that by doing this to stock cylinders it runs the risk of running too hot and weakening the spigots. This is my daily driver, so off they come. They may not be bad for racing.... If anyone is interested, contact me here or PM me. Shoot me an offer, anything reasonable (for both parties) will be accepted.}}   Buellsrule Posted on Thursday, August 21, 2008 - 11:39 am:        Cylinders are no good. Engine builders have told me that .030-.040 over is it. Nothing more. Sorry, BR.   Medic352 Posted on Thursday, August 21, 2008 - 06:17 pm:        What will you take for them?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: