| Author | Message | ||
     Phelan |
for sale. I'm replacing it with a forcewinder intake so I can fit my Force pipe on the bike. The setup includes the billet backplate, 2" K&N filter, later grayish Carbon Fiber HamCam (not the S2 original green one) and screws. I'm reusing the breather setup so it is not included. $75 shipped US48. (Message edited by phelan on July 21, 2008) | ||
| Phelan |
bump | ||
| Guell |
phelan, will this retrofit to a m2? if so im interested. | ||
| Hotrats |
i'm interested also - would like to see a pic of the backplate especially thanks andyh | ||
| Phelan |
yes, this will fit all carbed Buells, but it will have the angle it does on an S2. You will also have to have some sort of external blow-by relocation setup or whatever it's called (the tubes that go from the breather bolts). I'm keeping mine fir the new setup. This setup runs about $300 new w/ the C/F hamcam. gimme your email address and I'll send you a pic. | ||
| Spiderman |
PM sent | ||
| Phelan |
Sale pending to Spiderman. Guell, the angle cannot be adjusted; the venturi is machined into the backing plate and it bolts into the breather adapter. | ||
| Phelan |
SOLD. Thanks. |
