| Author | Message | ||
     Fullmoonracing |
2007 Nastybikes Prostreet Buell: Nasty bikes link:http://www.nastybikes.com/matt_180.htm Neck - 38° Rigid Buell 2" under frame Stretched 5" in the back 2" in the front 20" Seat hight Pmfer 5 spoke Hotrod rims.It has Metzler ME 880 tires, the front is a 17" and the rear is a 18". Completey Polished Buell forks with a chrome turn signal bar tucked under it. It also has PM 6 piston caliper on the front and the stock single piston Buell caliper on the rear. The rear pully is a stock Buell pulley that has been polished up nicely. The headlight is a Harley Davidson V-Rod headlight with a chrome mount. Custom built rear fender with fender struts with all hidden mounting with Radiantz tail,brake and turn signals flushed into them for a smooth look. False oil tank under seat. Custom built Aluminum oil tank just under that. Forward controls are Jay Brake Controls. T-Bar Handle bars are 5" up and 7" back, with a Dakota Digital Speedo/Odometer combo.Speedo still needs set up. It works but is off. It also has new style chrome harley hand controls with grips that match the forward controls and passenger rear pegs. The seat is made seat with plunty of foam for those long rides. It has green flames stitched into thetop of it. The pipes are Pipe Dreamz, Wet Dreams pipes for the wide tire bikes. All chrome and the bike is jetted just right so there is NO discoloring on them. It also has a set of there torque cones in it too. The tank is a Harley stretched sportster Fat Bob 1 piece fuel tank. Hidden choke and key for added safety and a custom look. The frame has alot of smoothed areas, around the neck and around the seat and under the seat. The paint job is by 8 Ball Customs in Zanesville,ohio. All of the filling was lead filling. The wiring that was used was a Micro Harness with turn signals. Extremely nice and neat set up!!! The ignition system is a Dyna Twin Fire II, single fire high performance ignition. Any other questions feel free to ask any questions you may have. email me at:mfrick1@columbus.rr.com and I will send you pictures. My pictures are to large for this site. I promise you, you won't be disappointed.$15,500 Or Best Offer | ||
| Wile_ecoyote |
Dont look like no Buell to me. | ||
| Fullmoonracing |
If you look close it has the buell inverted forks, The stock pulley,the motor,brakes and more. Sorry to disappoint you. | ||
| Bartimus |
 | ||
| Guell |
good luck with the sale, its a pretty bike. You might want to try a different website though, im sure your going to get more responses like the above. (Message edited by Guell on December 05, 2007) | ||
| Fullmoonracing |
Any sites come to mind? | ||
| Jsunstar |
i bought a buell roller from matt a while back and he is a stand up guy. i know this is a (puritan) buell website but its supposed to be a open minded website as well. sure, this bike is no longer a buell but he has every right to post to the classifieds and just cause you dont like it doesnt mean you have to trash his build. (actually, you havent been trashed all that bad, ive seen guys with mutants get bashed on here for days!) He is selling a motorcycle and last time i checked, this was a motorcycle enthusiast website. its not what im into but i think matt did a nice job on it. good luck with the sale. | ||
| Ratbuell |
I respect the bike for what it is, but like Jsun said above...not my thing. Try cycletrader.com, they're searchable by region / price / bike type or style / price. I've had a lot of customers have good luck on there. | ||
| Onahog |
Ok...My 2 cents 2... Yes, Its a kewl build, but I hope it wasnt based from an S2...If so, whats the last 4 digits of the engine vin #....? We can then stroke it offa the S2 owners list......HB | ||
| F_skinner |
What Onohog said, if the motor is from a S2 let us know the last four of the VIN so we can cross it off the list. Frank | ||
| Court |
Please let that not be an S-2 motor. | ||
| Ratbuell |
Looking at the pulley cover right behind the cam cover, it appears to be a later motor. X1 converted to carb seems popular, as do the M2s. Maybe the builder will be kind enough to chime in? | ||
| Onahog |
Rat,That pulley cover looks to be one from a sporty....Ive done a very similar cut on one on my s3 and s2..& look were the footpeg and brake & pedal mountd etc....Thus, we cant rule out the fact yet that it isnt an S2 stove in that puppy.. Heres hopin NOTta.....Hb | ||
| Fullmoonracing |
not sure what it came out of. I got it with the rolling chassis from texas. SO what are you guys getting at? I don't buy stolen stuff. If is was a stolen motor, It would have been caught when I had the bike inspected earlier this year. So to answer your questions, No the motor isn't stolen. | ||
| Buellinachinashop |
I don't think its hideous, I've seen alot more uglier XB/tube mods than this. Good luck with the sale. | ||
| Fullmoonracing |
I have on question for all of you that are rippen on my build? Why? Obviously you that are cuttin on it, don't have the vision to do something on your own. Just to let you all know, I'm an ex road racer and I truely love stock buells. They are fun as hell to rip around on. But I'm not looking to end up smashed on the road somewhere like some of you will probably end up. So Please get off my ass about my ride! You guys that are cuttin on it probably own Buell blasts anyway!!!!!!!!!  | ||
| Onahog |
Hey dude....I got NO problem with ur bike... all I was getting at was I had hoped the donor Buell wasnt an S2....Some of us around here are very partial to the S2s and hate to see another bite the dust to a chopper build....No one ever said a word about anything being stolen!....Were just tryin to track down all of the 2100+ ,S2 and S2T that still exist....Thats why we asked for the last 4 digits of the Vin #... See S2 owners section of BWB....Good luck with your sale....Maybe try runnin it on Craigs list or Kijiji classifieds....onahog..... | ||
| Buelltroll |
You'll NEVER sell it on here. They will just keep talkin sh*t and NO ONE will make any offers. Go ebay or Craigslist and let this thread die. It's really lame but EVERY TIME someone builds one of these great looking bikes from one of the ugliest buell models ever made this same crap happens. | ||
| Dtx |
Fullmoon, You have some mad skills to build a bike like that! I have some friends who have built some Buell choppers and can appreciate all the hard work that goes into them. Usually at the "Bike Nights" we go to they will get the most attention of ALL bikes there including other choppers. While not the biggest interest in some people, they are about the most unique customs rolling on the streets. Good luck with your sell and don't let some of these guys bother you. | ||
| Wile_ecoyote |
Wish I could retract that statement, its a nice ride, just dont look like a Buell to me. I APOLOGIZE! It came across all wrong, let it be known I'm an ass. Thankyou | ||
| Henry_the_8th |
Do you build and sell these for a living? | ||
| Rocketsprink |
some of you people are total @ssholes. Guys just trying to sell a bike. Not asking for your unsolicited, clusterfuk, rude comments. Get bent. | ||
| Newfie_buell |
Maybe if it was advertised as a custom the response would have been different. I hate to see any Buell disassembled and mutated. | ||
| Fullmoonracing |
Thanks for all the comments. I appreciate the compliments. Again I truely lover the stock layout of the Buells and I thought it would be nice to put on in a hard tail frame and stick a fat 240-250 tire under the tail of it. And to be honest with you, when they are stretched out like that they handle nice. This is my second build and the first one I bought a frame from Motorcycle works in Kansas. (www.choppersforever.com) It looks more drag bike style, but it really handles. I was clocked out in sturgis by on of those road side MPH warning sign doing 77 mph through a curve going from sturgis to deadwood before it opens up to four lane. Not bad for an Mutant buell. Also thanks for the input about craigs list and cycle trader I appreciate the info. This is just my hobby not a job, I'd like to do it full time, but as flooded as the motorcycle industry is now, I'd go hungry. |
