| Author |
Message |
    
Mrsmichele
| | Posted on Thursday, August 16, 2007 - 09:01 am: | 
|
I'll take the seat too. I thought it was spoken for. Email sent for a total shipped. As soon as my parts arrive I'll have an orange manta tank, fender, rear tail section, and fly screen and a low 2001 M2 seat for sale for the same prices listed here for the S1 parts.
(Message edited by mrsmichele on August 16, 2007) |
Torquemonster
| | Posted on Thursday, August 16, 2007 - 05:45 pm: |
|
PMd you, Michele. |
Sanchez
| | Posted on Friday, August 17, 2007 - 10:59 am: |
|
> Not sure how many miles I've got on them, but seems premature for a rebuild.
Sounds like you just need to tighten up your crutch cable. (; |
Mrsmichele
| | Posted on Friday, August 17, 2007 - 07:38 pm: |
|
I received the tank today. It looks and fits great. Keep me informed on the seat. I'd still like to purchase it too. Michele |
Mikef5000
| | Posted on Saturday, August 18, 2007 - 09:09 am: |
|
How about foot pegs? Are they factory rubber, or did you put some metal ones on there? I'm trying to find a set of metal ones, whether they're X1 or aftermarket isn't a big deal. |
Sanchez
| | Posted on Saturday, August 18, 2007 - 01:47 pm: |
|
I do have the factory footpegs, but no aftermarket ones. Other stuff I still have:
ZTL caliper and master cylinder
ZTL rotor
98 S1 shock
Swingarm
Oil tank
Kickstand
Both switch clusters (left one a bit worse for wear)
Pro taper 7/8 YZ-High bars
Wiring harness
XB front fender |
Jayvee
| | Posted on Sunday, August 19, 2007 - 12:45 am: |
|
PM sent. |
Clrobins
| | Posted on Tuesday, September 04, 2007 - 10:09 pm: |
|
is the shifter still intact? |
Smoke
| | Posted on Wednesday, September 05, 2007 - 05:44 am: |
|
sanchez is on ride about, the shifter mechanism looked good when we took it off the engine i got from him. i think he said that he will be home early next week.
tim |
O2man98
| | Posted on Saturday, September 08, 2007 - 02:31 pm: |
|
How much for the front XB caliper? |
Smoke
| | Posted on Saturday, September 08, 2007 - 05:33 pm: |
|
last post i saw from sanchez indicates he might get home 9/9 for work mon. you might pm him.
tim |
Sanchez
| | Posted on Wednesday, September 12, 2007 - 07:03 pm: |
|
> is the shifter still intact?
Yes, but it's MIA for a bit. I gave it to my father, who's a mechanical engineer, so he could get me measurements for new bushings. I always wanted to replace the factory bushings, but never had the down time until I wrecked the bike. If you don't need it for a while, you can get a shift linkage and maybe even be a test dummy for new bushings. 
> How much for the front XB caliper?
The caliper, braided line, and master cylinder are $350 new, but mine has a pretty big scratch in it, so I'd take $125 + shipping.
 |
Liebermann
| | Posted on Thursday, September 13, 2007 - 04:24 pm: |
|
how much for rotor? Caliper/master cylinder? |
Sanchez
| | Posted on Thursday, September 13, 2007 - 04:39 pm: |
|
A new rotor is $140 from the dealership, so I'd take $70 + shipping for mine. $195 + shipping total for the rotor, caliper, master cylinder, and brake line. |
|
